An error occurred
POWER SUPPLY 5 AMP + 2X BATTCHGR (RS485)
CTN: CM723B | Product No.: F.01U.275.894Key Specifications
Voltage Input: | 100-240V AC @ 2.0A 50-60Hz |
Stand-by Battery: | Up to 2 x 12V DC 7.2Ah sealed rechargeable battery Panasonic LC-P12R2P or equivalent or 1 x 12V DC 18Ah sealed rechargeable batteryResettable fuse protected @ 6 Amps |
Voltage Output: | 13.8V DC @ 5 Amps (Primary supply source only) |
Battery Discharge Cycle: | AC Off: Keypads indicate trouble condition, AV Fail report resent (if programmed)13.8V DC :Charging level11.5V DC: Low battery trouble at keypads, low battery report sent (if programmed)10.0V: DC Shut down and battery disconnected as voltage falls below 9V DC. |
Battery Recharge Cycle: | AC On: Panel restarts, battery charging begins. AC trouble clears from keypads, AC restore report sent (if programmed).12.8V DC: Battery trouble clears from keypads, battery restore report sent (if programmed).13.8V DC: Battery float charged. |
Connection (RS485 LAN): | Max total LAN length using multi strand security cable = 300mMax total LAN length using 2 pair twisted shielded data cable (Belden 8723) = 1200m |
Temperature: | 0o to 55oC Operating |
Humidity: | 5% to 85% at 30oC non condensing |
Dimensions: | 50(W) x 23(D) x 58(H)mm |
Warranty: | 3 years |