Bosch Security and Safety Systems Czech Republic
Product subcategory
Basic functions
Tamper switch for enclosure, 2pcs
Commercial Product No. D110 | Product No. F.01U.246.707
- Tamper switch fits all enclosures
Mounting plate, 6 location 3-hole, 5 pcs
Commercial Product No. D9002-5 | Product No. F.01U.217.699
- Provides protection and additional mounting options for 3-hole mounted modules
- Mounts in G Series-compatible enclosures
Programming key
Commercial Product No. ICP-EZPK | Product No. F.01U.003.534
- Transfers configurations to and from Easy Series and AMAX panels
Enclosure lock and key set
Commercial Product No. D101 | Product No. 4.998.800.200
- Lock and key set fits Bosch enclosures
Steel enclosure for module, small, grey
Commercial Product No. D203 | Product No. 4.998.800.374
- Compatible with input and output modules that have 3-hole or 3-point mountings
- Compatible with receivers that have 3-hole or 3-point mountings
- Optional tamper switch mounting location
Accessory mounting bracket for enclosure
Commercial Product No. D137 | Product No. F.01U.020.521
- Mount accessory modules in B8103, D8103, D8108A, and D8109 enclosures.
Low battery disconnect module
Commercial Product No. D135A | Product No. 4.998.125.829
- Disconnects a B6512/B5512/B4512/B3512 from the battery when the battery level drops to 9.5 VDC
- Required for use with compatible control panels for CAN/ULC S559
- Quick and easy installation
Steel enclosure, medium, white
Commercial Product No. B10 | Product No. F.01U.268.495
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel with a white semi-gloss finish
- Easy access locations for battery placement
- Optional tamper switch mounting location
Transformer plug-in, 16V 40VA
Commercial Product No. D1640 | Product No. 4.998.125.832
- System transformer rated at 16.5 VAC, 40 VA
- Suitable for use on approved UL applications in the USA
Dual multiplex driver
Commercial Product No. DS7436 | Product No. 4.998.126.025
- Provides a two-wire multiplex bus for the connection of up to 120 remote points
Quick connect cable, SDI2, 10pcs
Commercial Product No. B501-10 | Product No. F.01U.268.496
- Cable for quick connection
Octo-POPIT input module
Commercial Product No. D8128D | Product No. 4.998.800.197
- Provides point identification for initiating devices
- Expands the number of points in the system
- DIP switch programmable
Power supply, LSN
Commercial Product No. ISP-NEV400-120 | Product No. F.01U.308.346
- Provides a remote power supply
- Transmits trouble and tamper events via LSN
- Can be connected to all centralized or decentralized LSN control panels
- A maximum of two 12 V/18 Ah batteries can be used
GPRS/GSM integrated communicator
Commercial Product No. ITS-DX4020-G | Product No. F.01U.082.094
- Secure IP communication from compatible Bosch panels to Bosch receivers
- Remote programming of IP compatible Bosch panels
- GSM reporting from Contact ID control panels to any PSTN receiver
- Easy provisioning using SMS (text) or USB
- Easy installation, troubleshooting, and maintenance
Steel enclosure, medium, grey
Commercial Product No. AE1 | Product No. 4.998.800.323
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel
- Easy access locations for battery placement
- Optional tamper switch mounting location
Multiplex module, single input
Commercial Product No. DS7457IE | Product No. 4.998.140.244
- Power-limited and supervised input zones
- Compact enough to fit within most back boxes and enclosures
- Address settings through DIP switches
Battery, 12V 5Ah
Commercial Product No. D1250 | Product No. 4.998.800.376
- 12 VDC sealed lead‑acid
- Fully rechargeable
- Maintenance‑free
- For use as secondary power for accessory modules
- Long service life
USB/serial interface module
Commercial Product No. DX4010V2 | Product No. F.01U.080.969
- RS-232/USB connectivity
- Enhanced direct connection for Remote Programming Software (RPS)
- RJ-16 data bus
- Transparent enclosure
- Diagnostic light emitting diodes (LEDs)
- DIP switches for address and bus programming
Input module, dual-zone
Commercial Product No. DS7460I | Product No. 4.998.113.231
- Supervises two protection loops
- Can be used in UL Listed fire and security applications
- DIP switch programmable
USB direct connect cable
Commercial Product No. B99 | Product No. F.01U.278.853
- Allows programming on-site without an Ethernet cable or interface module
Battery, 12V 10-12Ah
Commercial Product No. IPS-BAT12V-12AH | Product No. F.01U.579.778
- Lead battery
- Shock-resistant plastic enclosure
- Dry-cell battery
- Can be used irrespective of its position
- Low self-discharge
Plug-in Communicator, Telephone
Commercial Product No. B430 | Product No. F.01U.323.795
- Provides a single telephone line with RJ-45 connection for central station reporting and remote programming
- Easily configured for communications from Remote Programming Software (RPS) or a keypad, eliminating the need for separate configuration
- Easy two-step plug-in installation, troubleshooting, and maintenance
Octo-output module, form C relays
Commercial Product No. D8129 | Product No. 4.998.800.198
- Programmable relay functions
- Provides eight Form C relays
- 1 A at 30 VDC relay contact rating
- Slide switch configuration
- Allows remote control of relays
- Screw terminal connections
Mounting plate for D8103 enclosure
Commercial Product No. B12 | Product No. F.01U.260.846
- Easy-to-install standoff locations for mounting supported modules
- Supports B Series control panels in larger enclosures such as the D8103
Battery, 12V 2.2Ah
Commercial Product No. D1222 | Product No. 4.998.125.821
- 12 VDC sealed lead‑acid
- Fully rechargeable
- Maintenance‑free
- Long service life
- Appropriate for use as uninterruptible power supplies
Universal plastic enclosure, white
Commercial Product No. AE20 | Product No. 4.998.800.375
- Flexible design accommodates a number of input, output and receiver modules
- Supports modules with circuit boards with either through‑hole or three‑point mounting systems
- Mounts to multiple gang box types
Battery, 12V 7Ah
Commercial Product No. D126 | Product No. 4.998.125.825
- 12 VDC sealed lead‑acid
- Fully rechargeable
- Maintenance‑free
- For use as secondary power source
- Long service life
Dual tamper switch
Commercial Product No. ICP-EZTS | Product No. F.01U.217.038
- Combination tamper switch senses when the opens and if removed from the wall
- Includes a wire loop that can accommodate additional tamper outputs
Enclosure with CE transformer
Commercial Product No. D8108A-CE | Product No. F.01U.323.267
- 18 gauge cold-rolled steel enclosure
- Including a CE transformer
Earth ground clamp
Commercial Product No. D167 | Product No. F.01U.020.528
- Clamp for earth ground
- Diameter range of 1.3 - 2.5 cm (0.5 - 1 in.)
Single input/output module
Commercial Product No. DS7465I | Product No. 4.998.113.233
- Supervises one power-limited input zone
- Provides one output relay
- Can be used in UL Listed fire and security applications
- DIP switch programmable
SDI2 8-Output Expansion Module
Commercial Product No. B308 | Product No. F.01U.323.802
- Programmable output functions
- Easy to read switch addressing
- Provides eight Form C relays
- 1 A at 5-24 VDC relay contact rating
- Allows remote control of outputs
- Quick modular interconnect wiring connector
Door Controller
Commercial Product No. B901 | Product No. F.01U.323.803
- Direct interface to compatible Wiegand card readers
- On-board buzzer output and supervised on-board points
- Request to Exit and Request to Enter inputs that can have a shunt only option
- Four door states: Locked, Unlocked, Secured, Fire Unlock
- SDI2 support as well as SDI compatible
Wireless SDI2 bus interface
Commercial Product No. B810 | Product No. F.01U.323.799
- Dual internal antennas provide spatial and polar RF signal reception for high reliability
- Cover and wall tamper protection
- Multiple device enrollment options as well as RF diagnostics ensure efficient and effective installation
- Supports supervision of wireless points (504), keyfobs (1000), and repeaters (8)
- External status LEDs
- Detection and reporting of radio frequency interference
Ethernet Communication Module
Commercial Product No. B426 | Product No. F.01U.324.383
- Full two-way IP event reporting with remote control panel programming support
- 10/100 Base-T Ethernet communication for IPv6 and IPv4 networks
- NIST-FIPS197 Certified for 128-bit to 256-bit AES Encrypted Line Security
- Plug and Play installation, including UPnP service to enable remote programming behind firewalls
- Advanced configuration by browser, RPS, or A-Link
Steel enclosure, large, grey
Commercial Product No. D8103 | Product No. 4.998.800.201
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel with a gray finish
- Easy access locations for battery placement
- Optional tamper switch mounting location
Universal enclosure, white
Commercial Product No. B8103 | Product No. F.01U.300.149
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel with a white semi-gloss finish
- Easy access locations for battery placement
- Optional tamper switch mounting location
Battery, 12V 17-18Ah
Commercial Product No. IPS-BAT12V-18AH | Product No. F.01U.579.780
- Lead battery
- Shock-resistant plastic enclosure
- Dry-cell battery
- Can be used irrespective of its position
- Low self-discharge
Battery, 12V 38-45Ah
Commercial Product No. IPS-BAT12V-45AH | Product No. F.01U.579.782
- Lead battery
- Shock-resistant plastic enclosure
- Dry-cell battery
- Can be used irrespective of its position
- Low self-discharge
Battery, 12V 24-27Ah
Commercial Product No. IPS-BAT12V-27AH | Product No. F.01U.579.781
- Lead battery
- Shock-resistant plastic enclosure
- Dry-cell battery
- Can be used irrespective of its position
- Low self-discharge
SDI2 8-Input Expansion Module
Commercial Product No. B208 | Product No. F.01U.323.801
- Programmable input point functions
- Easy to read switch addressing
- 2 interconnect wiring connectors
- Provides eight points
Transformer, 230/18VAC 45VA, Euro
Commercial Product No. DE-45-18 | Product No. F.01U.166.215
- Provides efficient, constant power for compatible products
- For use in Europe
2-Wire Powered Loop
Commercial Product No. B201 | Product No. F.01U.323.798
- Suitable for use with 2-wire smoke detectors and burglary devices
- Supports up to 20 compatible smoke detectors
- Resets latching devices from the control panel
- Connects to the control panel terminal block with easy-to-install integrated pins
Enclosure lock and key set for D2803
Commercial Product No. D101X | Product No. 4.998.155.085
PRODUCT FAMILY
DS7457i Series Single‑zone Input Modules
- Power-limited and supervised input zones
- Compact enough to fit within most back boxes and enclosures
- Address settings through DIP switches
PRODUCT FAMILY
D9127 Series POPIT Modules
- Provides point identification of initiating devices
- Supervises wiring to devices for circuit integrity
- Expands the number of points in the system
- Compact size
- Terminal connections for reliability
- Multiplex technology
- Low installation costs
PRODUCT FAMILY
D8132 Battery Charger Modules
- Provide additional standby power for control panels
- 1200 mA battery recharging circuit
- Suitable for 12 VDC and up to 27 Ah of batteries
- Suitable as a standalone 12 VDC, 1 A power supply (not UL rated for this application)
PRODUCT FAMILY
RADION keyfob
- Water and dust resistant
- Arm, disarm and panic functions
- Assigned by user for accurate reporting of open close signals
- LED indicator
- Programmable option buttons (only available on 4-button model)
PRODUCT FAMILY
DS7432 Series Eight‑input Remote Modules
- Address up to eight input loops
- Serial dual end-of-line (EOL) wiring with tamper status (DS7432E)