Skip to content Skip to navigation

Bosch Security and Safety Systems Czech Republic

PRODUCT FAMILY

ISN-SM Seismic Detectors

ISN-SM Seismic Detectors

Seismic detector, 50m²

Commercial Type No. ISN-SM-50
Product No. F.01U.002.248

ISN-SM Seismic Detectors

Seismic detector, 80m²

Commercial Type No. ISN-SM-80
Product No. F.01U.002.246

Compatibility: Better than EN 50130-4
HF interference tolerance (EN 61000-4-3): No alarm or setup at critical frequencies within a range of 1 MHz to 1000 MHz at > 30 V/m.
Dimensions: 8.9 cm x 8.9 cm x 2.2 cm    
Weight: 0.320 kg
Humidity (EN60721): Up to 95% relative humidity, not condensing
Housing protection class (EN 60529, EN 50102): IP43
Temperature (operating): -40 °C to +70 °C
Temperature (storage): -50 °C to +70 °C
For the test: Low < 1.5 VDC High > 3.5 VDC
Test duration (including test transmitter ISN-GMX-S1): ≤ 3 sec
Model Operating radius, Monitoring area
Concrete Steel, Concrete
ISN-SM-50 4 m, 2 m, 50 m2
ISN-SM-80 5 m, 2,5 m, 80 m2
Alarm relay (changeover contact): Contact closed in standby mode (opened in the event of an alarm) designed for 30 VDC, 100 mA, resistance < 20 Ohm
Alarm holding time: Approx. 2.5 sec
Tamper switch/wall tamper: Tamper contact closed in standby mode (opened in the event of tampering) designed for 30 VDC, 100 mA, resistance < 45 Ohm
Test connection: Analog integration signal
Power consumption at 12 VDC: Alarm: 6 mA
Power supply monitoring: 8 VDC to 16 VDC (12 V nominal)
Discontinued

Anti-drill foil

Commercial Type No. ISN-GMX-D7
Product No. F.01U.004.305

Anti drill protection foil for use in seismic detectors.

Mounting plate for seismic detector

Commercial Type No. ISN-GMX-P0
Product No. F.01U.003.366

Mounting plate for seismic detectors. Suitable for mounting seismic detectors to steel or concrete surfaces.

Swivel plate for ISN-SM-50

Commercial Type No. ISN-GMX-P3S
Product No. F.01U.003.368

Swivel plate for use with ISN-SM-50 seismic detectors.

Test transmitter

Commercial Type No. ISN-GMX-S1
Product No. F.01U.003.371

Test transmitter for installation under a seismic detector. Checks the detector and the physical contact between the detector and the protected object.

Wall-recess kit

Commercial Type No. ISN-GMX-W0
Product No. F.01U.003.372

Wall recess set for surface or flush mounting a seismic detector to a wall.

Sensor tool PC software

Commercial Type No. ISN-SMS-W7
Product No. F.01U.004.306

Programming software for seismic detectors.

Title Type Language
Title
CCC
Type
PDF
Language
zh-CN 
Title
Declaration of Conformity
Type
PDF
Language
en-US 
Title
GOST
Type
PDF
Language
ru-RU 
Title
NCP
Type
PDF
Language
nl-NL 
Title
UL
Type
PDF
Language
en-US 
Title
ULC
Type
PDF
Language
en-US 
Title
VdS
Type
PDF
Language
de-DE  en-US 
Title
VdS
Type
PDF
Language
de-DE 
Title
Datasheet
Type
PDF
Language
Title
Installation manual (ISN-SM-50)
Type
PDF
Language
Title
Installation manual (ISN-SM-80)
Type
PDF
Language
Title
Quick Selection Guide (Intrusion Detectors (Europe, Middle East, and Africa))
Type
PDF
Language
Title
User manual (Seismic Detectors Application Guide)
Type
PDF
Language
en-US 
forward-right_adjusted