Skip to content Skip to navigation

Bosch Security and Safety Systems Indonesia

AUTODOME Series Mounts and Accessories

ETHERNET TO SFP INTERFACE KIT

Commercial Product No.: VG4-SFPSCKT | Product No.: F.01U.142.529
  • 0in stock
  • Express Shipping is available for products in your cart. (time left:)

Expected delivery:28/11/2017

Description Fiber Optic Ethernet Media Converter kit.Requires a small form-factor pluggable (SFP) module (sold separately).
Data Interface Ethernet
Data Rate 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port
Compatible Receiver CNFE2MC/IN
Installation Installed inside a NDA-U-PAx, VG4-A-PAx or a VG4-A-PSUx power supply box, or in a MIC IP PSU, with supplied mounting hardware. Note: Wiring for the VG4-SFPSCKT must be routed through the proper conduit opening on the power supply box. Refer to the installation guide that accompanies the module.
Green Power is applied, fiber link is valid.
Red Power is applied, fiber link is missing.
Green/Flashing Red, rapid Power is applied.Fiber link is valid.Data is present and video is streaming from the camera to a network connection.
Green/Flashing Red, slow Power is applied.Fiber link is valid.Data is present.Video is not streaming from the camera, or the RJ45 connection to the camera is not valid.
Right side, Flashing Green Data is present.
Right side, Off No data is present.
Left side, Amber Link is valid at 100 MB.
Left side, Off If the right side is flashing green, link is valid at 10 MB.
No LED lit The network cable is missing, is defective, or the other end of the network cable is not connected.
Power 24 VAC @ 220 mA (supplied by the camera)
Current Protection Automatic resettableSolid-state current limiters
Circuit Board Meets IPC Standard.
Dimensions (LxWxH) 7.4 x 7.1 x 3.8 cm (2.9 x 2.8 x 1.5 in.)
Shipping Weight 0.91 kg (2 lb)
MTBF > 100,000 hours

Parts included with this product

Quantity Component
1 VG4-SFPSCKT Fiber Optic Ethernet Media Converter kit
1 Set of mounting hardware

Title Type Language
Title
Declaration of Conformity (VG4-SFPSCKT / FE2MC-B)
Type
PDF
Language
en-US 
Title
CAD Drawing DWG (VG4-SFPSCKT)
Type
DWG
Language
en-US 
Title
CAD Drawing DXF (VG4-SFPSCKT)
Type
DXF
Language
en-US 
Title
Datasheet
Type
PDF
Language
en-US 
Title
Installation manual (VG4-SFPSCKT)
Type
PDF
Language
en-US 
forward-right_adjusted