Condenser microphone
Commercial Product No.: LBB9600/20 | Product No.: F.01U.507.008Key Specifications
Voltage range | 11 V to 52 V (acc. to DIN 45596 and IEC 268-15A) |
Current consumption | <1.5 mA |
Polar pattern | Unidirectional |
Frequency range | 100 Hz to 16 kHz |
Sensitivity | 2 mV/Pa +/-‑1 dB (-54 dB rel. to 1 V/Pa) |
Rated output impedance | 200 ohm |
Equivalent input noise level | 26 dB (A) |
Dimensions (D x L) | 54 x 170 mm (2.13 x 6.69 in) |
Weight | 245 g (8.64 oz) |
Color | Black |
Switch | On/off slide |
Cable type | 2-core screened |
Cable length | 7 m (23 ft) |
Connector | 3‑pin XLR (male) |
Operating temperature | -20 °C to +55 °C (-4 °F to +131 °F) |
Storage and transport temperature | -40 °C to +70 °C (-40 °F to +158 °F) |
Relative humidity | <95% |

Microphone floorstand
CTN LBC1221/01
Product No. F.01U.507.018
Microphone floor stand, three folding legs, matt black, adjustable length from 850 to 1600 mm (2.79 to 5.25 ft) with twist clamp, threaded connector 3/8" Whitworth.

Adjustable boom
CTN LBC1226/01
Product No. F.01U.507.019
Microphone boom arm, matt black, maximum reach 670 mm (2.12 ft), length 840 mm (2.76 ft), fits onto 3/8' Whitworth threaded microphone stands.

Microphone table stand
CTN LBC1227/01
Product No. F.01U.007.613
Table microphone stand, matt black, heavy round cast-iron base, 130 mm (5.12 in) diameter with shock-absorbing rubber insert under surface, with 3/8” Whitworth stud.
Parts included with this product
Quantity | Component |
---|---|
1 | LBB 9600/20 Condenser handheld microphone |