LBC2900/xx Unidirectional handheld microphone
LBC2900/xx Unidirectional handheld microphone
Dynamic microphone, 6.3mm jack
Commercial Type No. LBC2900/15
Product No. F.01U.507.009
LBC2900/xx Unidirectional handheld microphone
Dynamic microphone, XLR
Commercial Type No. LBC2900/20
Product No. F.01U.507.010
| Type | Handheld |
| Polar pattern | Unidirectional |
| Frequency range | 80 Hz to 12 kHz |
| Sensitivity | 1.7 mV/Pa ±3 dB |
| Rated output impedance | 600 ohm |
| Dimensions (D x L) | 52.4 x 165 mm (2.06 x 6.49 in) |
| Weight | 270 g (9.5 oz) |
| Color | Dark gray |
| Switch | On/off slide |
| Cable length | 7 m (23 ft) |
| Connector (/15) | 6.3 mm (1/4") stereo jack |
| Connector (/20) | 3‑pin XLR |
| Operating temperature | -10 °C to +55 °C (+14 °F to +131 °F) |
| Storage and transport temperature | -40 °C to +70 °C (-40 °F to +158 °F) |
| Relative humidity | <95% |
Microphone clamp
Commercial Type No. LBC1215/01
Product No. F.01U.507.017
Universal spring-loaded microphone holder, friction angular adjustment, matt black, screws onto a 3/8", 1/2", or 5/8" Whitworth thread, holds microphone stem with 19 to 32 mm diameter.
Microphone floorstand
Commercial Type No. LBC1221/01
Product No. F.01U.507.018
Microphone floor stand, three folding legs, matt black, adjustable length from 850 to 1600 mm (2.79 to 5.25 ft) with twist clamp, threaded connector 3/8" Whitworth.
Microphone table stand
Commercial Type No. LBC1227/01
Product No. F.01U.007.613
Table microphone stand, matt black, heavy round cast-iron base, 130 mm (5.12 in) diameter with shock-absorbing rubber insert under surface, with 3/8” Whitworth stud.
Adjustable boom
Commercial Type No. LBC1226/01
Product No. F.01U.507.019
Microphone boom arm, matt black, maximum reach 670 mm (2.12 ft), length 840 mm (2.76 ft), fits onto 3/8' Whitworth threaded microphone stands.