Bosch Security and Safety Systems India
Product Variants
Product Families
More Content
Please acknowledge the Terms and Conditions
Product subcategory
Basic functions
Duct tube filters, 20pcs
Commercial Type No.: D344-TF | Product No.: 4.998.137.961
- Allow passage of smoke but restrict large particles
- Lightweight
- Easy to install
250 in stock
Smoke detector, long-range beam 24V
Commercial Type No.: D296 | Product No.: 4.998.125.869
- Operates over distances between 30 ft (9 m) and 350 ft (107 m)
- Six levels of switch-selectable sensitivity
- Built-in alignment sights and tamper protection
- Automatic range adjustment, signal synchronization, and contamination adjustment
- Remote indicator plate annunciates detector status and provides test points for voltage monitoring
250 in stock
Weatherproof backbox 4.75x3.25x2.25" red
Commercial Type No.: FMM-100WPBB-R | Product No.: F.01U.000.561
- Weatherproof cast metal back box
- Tapped hole for ¾‑in. NPT fitting
- Easy to install
250 in stock
PRODUCT FAMILY
D273 Photoelectric Smoke and Smoke and Heat Detectors
- 12 VDC or 24 VDC input
- Designed for commercial or residential use
- Four-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
250 in stock
Annunciator expander, 8 LED
Commercial Type No.: D7032 | Product No.: 4.998.140.388
- Provides eight remote LEDs
- Easy cable connection to D7030X LED Annunciators
- Easy connection to option bus
250 in stock
Base 4-wire, 24V
Commercial Type No.: D290 | Product No.: 4.998.800.527
- 24 VDC, four‑wire circuit compatibility
- Dual Form C relays
- Low profile construction
- Easy to install and service
- Molded in UL Listed white ABS plastic
250 in stock
Base with sounder & form A relay, 4-wire
Commercial Type No.: F220-B6RS | Product No.: 4.998.112.230
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
- UL464 approved sounder driven by the detector head or the NAC circuit
250 in stock
Beam smoke, reflective
Commercial Type No.: FIRERAY5000-UL | Product No.: F.01U.290.198
- Extended monitoring range
- Up to 2 detectors per system controller
- Two pairs of fire and fault relays (one per detector)
- Transmitter and receiver integrated into a compact housing
- Integral LASER alignment
- Self-alignment during operation
- Remote control unit at eye level for easy installation and programming
- Automatic contamination compensation
- Control unit with LED and LCD displaying - various operating states
- Adjustable alarm thresholds
- Building shift compensation
250 in stock
CO detector (Macurco CM-E1)
Commercial Type No.: FCC-380 | Product No.: F.01U.172.606
- Solid state sensor provides maintenance-free operation
- Microcomputer control provides virtual automatic operation
- 9 VDC to 32 VDC operation is compatible with 12 V and 24 V systems
- Can quickly test CO sensor on site
- Three-color LED status display
- Four‑wire technology for connection to any UL Listed control panel
250 in stock
Combustible gas detector, 12/24V
Commercial Type No.: D382 | Product No.: 4.998.800.524
- 12 VDC/VAC or 24 VDC/VAC operation
- Self-purging semiconductor sensor requires no maintenance or recalibration
- SPDT (Form C) alarm Relay and SPST (Form A) trouble relay designed for seamless connection to control panels or other devices
- Installer selectable self-restoring or latching functionality
- Red and Green LED status indicators
250 in stock
PRODUCT FAMILY
D263 Photoelectric Smoke and Smoke and Heat Detectors
- 12 V or 24 V input
- Designed for commercial or residential use
- Two-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
250 in stock
PRODUCT FAMILY
D342 Family four‑wire duct smoke detector housings
- For 1 ft. (30.5cm) to 10 ft. (3 m) ducts with air velocity between 300 ft./min. to 4000 ft./min. (1.52 m/s to 20.3 m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
250 in stock
PRODUCT FAMILY
D7030X Family LED annunciators
- Use with the FPA‑1000 Analog Addressable Fire Panels or FPD‑7024 FACPs
- LED indicates power, trouble, and zone status
- LED annunciates eight individual zones expandable to 64 zones
- Aesthetically appealing appearance, mounts flush to electrical box in either surface or flush mounted configurations
- UL Listed
250 in stock
PRODUCT FAMILY
D7035 Octal Relay Modules
- Provides eight Form C programmable relay outputs
- Module connects to the FACP’s option bus
- D7035 mounts conveniently inside the FACP enclosure with no separate enclosure needed
- D7035B includes mounting skirt and enclosure for mounting outside of the FACP enclosure
- Up to two modules are supported by the FACP
250 in stock
PRODUCT FAMILY
F220 Heat Detectors
- Two-wire or four-wire bases
- 50 ft. (15.2 m) maximum spacing between detectors
- Visible identification of model: F220-135 / F220-135F = gray ring, F220‑190F = black ring
- Tamper detection
- Dual-color LED
250 in stock
PRODUCT FAMILY
F220 Photoelectric Smoke Detectors
- Two-wire or four-wire bases
- 30 ft. (9 m) maximum spacing between detectors
- Optional CO-sensor, heat-sensor enhanced detection chamber
- Clean chamber without removal or disassembly
- CleanMe signaling capability
- Sensitivity readout on detector
- Detector chamber compensates for dust build-up
- Tamper protection
- Dual-color LED
250 in stock
PRODUCT FAMILY
F220‑B6 Conventional detector bases
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
250 in stock
PRODUCT FAMILY
FMM‑100 Family Die‑cast Metal Fire Alarm Manual Stations
- Single or dual action
- Terminal connections
- Gold‑plated alarm contacts for corrosion resistance
- Surface or weatherproof back boxes
250 in stock
Surface backbox, 4.75x3.25x2.25", red
Commercial Type No.: FMM-100BB-R | Product No.: F.01U.000.557
- Red sheet-metal back box for interior surface-mount applications
- Knockouts (1/2-inch) on the short sides
250 in stock
Product subcategory
Basic functions
Showing of 19 Items
Added to Your Shopping Cart