FLEXIDOME IP starlight 7000 VR

FLEXIDOME IP starlight 7000 VR
Dome 1MP HDR 3-9mm auto IP66
CTN NIN-73013-A3A
Product No. F.01U.314.808

FLEXIDOME IP starlight 7000 VR
Dome 1MP HDR 10-23mm auto IP66
CTN NIN-73013-A10A
Product No. F.01U.314.812

FLEXIDOME IP starlight 7000 VR
Dome 2MP HDR 3-9mm auto IP66
CTN NIN-73023-A3A
Product No. F.01U.314.816

FLEXIDOME IP starlight 7000 VR
Dome 2MP HDR 10-23mm auto IP66
CTN NIN-73023-A10A
Product No. F.01U.314.820
Input voltage | Power-over-Ethernet (48 VDC nominal) and/or +12 VDC ±10% (auxiliary) |
PoE IEEE standard | 802.3af (802.3at Type 1) Power level: Class 3 |
Power Consumption | 7.2Â W max. |
Current draw (PoE) | 200Â mA max. |
Current draw (12Â VDC) | 600Â mA max. |
Sensor type | 1/2.8‑inch CMOS |
Effective pixels | 1920 (H) x 1080 (V); 2MP (approx.) |
Sensor type | 1/2.8‑inch CMOS |
Effective pixels | 1280 (H) x 720 (V) |
Color | 0.0075Â lx |
Mono | 0.0011Â lx |
High Dynamic Range (10-bit, 3x exposure) | 120 dB WDR |
Measured according to IEC 62676 Part 5 | 110 dB WDR |
Video compression | H.264 (MP); M- JPEG |
Streaming | Multiple configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth. Regions of Interest (ROI) |
Camera processing latency | <67Â ms (max. average at 1080p60) |
GOP structure | IP, IBP, IBBP |
Encoding interval | 1 to 50Â [60]Â ips |
1080p HD | 1920 x 1080 (1080p version only) |
Upright mode 1080p | 1080 x 1920 (1080p version only) |

Corner mount adapter
CTN VDA-CMT-PTZDOME
Product No. F.01U.288.068
Corner (270°) mount adapter for use with the appropriate wall mount

Corner mount for AUTODOME camera, 158mm
CTN VDA-CMT-DOME
Product No. F.01U.167.533
Sturdy bracket for mounting dome cameras in a 90° corner.

Pole mount adapter for LTC9210,9212,9215
CTN LTC 9213/01
Product No. F.01U.009.291
Flexible pole mount adapter for camera mounts (use together with the appropriate wall mount bracket). Max. 9Â kg (20 lb); 3 to 15Â inch diameter pole; stainless steel straps

In-ceiling housing for plenum, FLEXIDOME
CTN VDA-PLEN-DOME
Product No. F.01U.275.196
In-ceiling housing for plenums kit for several series of Bosch dome cameras

Suspended ceiling support kit,7"
CTN VGA-IC-SP
Product No. F.01U.245.271
Suspended ceiling support kit for dome cameras. Aperture Ø177 mm (Ø7 in). Maximum supported weight 11.3 kg (25 lb).

Midspan, 15W, single port, AC in
CTN NPD-5001-POE
Product No. F.01U.305.288
Power-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4Â W, 1-portWeight: 200Â g (0.44Â lb)

Midspan, 4 port x 15W, AC in
CTN NPD-5004-POE
Product No. F.01U.305.289
Power-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4Â W, 4-portsWeight: 620Â g (1.4Â lb)

Power supply, 120VAC 60Hz,12VDC 1A out
CTN UPA-1220-60
Product No. F.01U.076.155
Power supply for camera. 100-240 VAC, 50/60 Hz In; 12 VDC, 1 A Out; regulated.
Input connector: 2-prong, North American standard (non-polarized).

Service monitor cable, 2.5mm jack to BNC
CTN S1460
Product No. F.01U.500.418
2.5Â mm jack to BNC video connector cable. 1Â m

Surface mount box for dome camera
CTN VDA-455SMB-IP
Product No. F.01U.263.391
Surface Mount Box for dome cameras; IP version

Pipe mount bracket for FLEXIDOME, 158mm
CTN VDA-PMT-DOME
Product No. F.01U.275.155
Sturdy pipe mount bracket for dome cameras (Ø158 mm)