Bosch Security and Safety Systems South Korea
Product Variants
Product Families
More Content
Please acknowledge the Terms and Conditions
Product subcategory
Basic functions
Combustible gas detector, 12/24V
Commercial Product No. D382 | Product No. 4.998.800.524
- 12Â VDC/VAC or 24Â VDC/VAC operation
- Self-purging semiconductor sensor requires no maintenance or recalibration
- SPDT (Form C) alarm Relay and SPST (Form A) trouble relay designed for seamless connection to control panels or other devices
- Installer selectable self-restoring or latching functionality
- Red and Green LED status indicators
250 in stock
LCD annunciator keypad
Commercial Product No. FMR-7036 | Product No. F.01U.009.156
- Two‑line, 16‑character LCD display
- On‑board LEDs indicate Silenced, Trouble, Alarm, and Supervisory
- Silence and Reset buttons
- Built‑in keyswitch
- Attractive, low‑profile enclosure
250 in stock
IDC expander, 4-point
Commercial Product No. FPC-7034 | Product No. F.01U.003.861
- Adds four Class B (Style B) or Class A (Style D) initiating circuits to the FPD‑7024 FACP
- For use with normally‑open (NO) or normally‑closed (NC) alarm contacts
- Compatible with two‑wire or four‑wire smoke detectors
- Up to 20 two‑wire smoke detectors per circuit
- Easy installation due to plug‑in design and screw terminal circuit connections
- No programming necessary
250 in stock
Duct smoke head, 2-/4-wire, 12/24V
Commercial Product No. D285DH | Product No. 4.998.140.344
- Commercial or residential applications
- Two-wire or four-wire application, depending on base
- Chamber Check rapid-flash LED Automatic Trouble Indication reports contaminated chamber
- Flashing LED power indicator
- Steady-On LED alarm indicator
- Modular design
250 in stock
Annunciator expander, 8 LED
Commercial Product No. D7032 | Product No. 4.998.140.388
- Provides eight remote LEDs
- Easy cable connection to D7030X LED Annunciators
- Easy connection to option bus
250 in stock
LCD annunciator and control keypad
Commercial Product No. FMR-7033 | Product No. F.01U.009.157
- Compatible with the FPD‑7024 FACP
- Two‑line, 32‑character, alphanumeric LCD display
- Status LEDs identify alarm, trouble, supervisory, and silenced conditions
- Address setting by jumper
- Remotely control system commands and programming
- Passcode protection controls system access
- Low profile design
250 in stock
Remote indicator plate
Commercial Product No. D344-RL | Product No. 4.998.140.354
- Highly‑visible LED indicators
- Sensitivity voltage test point
- Easily mounted and wired
- Attractive faceplate
250 in stock
PRODUCT FAMILY
FMM‑100 Family Die‑cast Metal Fire Alarm Manual Stations
- Single or dual action
- Terminal connections
- Gold‑plated alarm contacts for corrosion resistance
- Surface or weatherproof back boxes
250 in stock
PRODUCT FAMILY
FCP‑500 Conventional Flush‑mount Smoke Detectors
- Modern, ultra-low profile design
- Color inserts match the surrounding decor
- Smooth, easily-cleaned detector surface
- Innovative retention mechanism
- High reliability
- Four-wire technology (six‑conductor wire)
- Compatible with 12Â VDC or 24Â VDC systems
- 30Â ft (9Â m) spacing between detectors
- Optional carbon monoxide (CO) sensor for false alarm reduction
- Dual color LED
- FCA-500-E Base with integrated end-of-line(EOL) relay
250 in stock
PRODUCT FAMILY
F220 Heat Detectors
- Two-wire or four-wire bases
- 50Â ft (15.2Â m) maximum spacing between detectors
- Visible identification of model: F220‑135 = no ring, F220‑135F = gray ring, F220‑190F = black ring
- Tamper detection
- Dual color LED
250 in stock
PRODUCT FAMILY
F220 Photoelectric Smoke Detectors
- Two-wire or four-wire bases
- 30Â ft. (9Â m) maximum spacing between detectors
- Optional CO-sensor, heat-sensor enhanced detection chamber
- Clean chamber without removal or disassembly
- CleanMe signaling capability
- Sensitivity readout on detector
- Detector chamber compensates for dust build-up
- Tamper protection
- Dual-color LED
250 in stock
PRODUCT FAMILY
F220‑B6 Conventional detector bases
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
250 in stock
PRODUCT FAMILY
D7035 Octal Relay Modules
- Provides eight Form C programmable relay outputs
- Module connects to the FACP’s option bus
- D7035 mounts conveniently inside the FACP enclosure with no separate enclosure needed
- D7035B includes mounting skirt and enclosure for mounting outside of the FACP enclosure
- Up to two modules are supported by the FACP
250 in stock
PRODUCT FAMILY
FMM‑100 Family Single‑action, Die‑cast Metal Manual Stations
- Terminal connections
- Gold‑plated alarm contacts for corrosion resistance
- Surface- or flush‑mounted back boxes
- Optional labels
250 in stock
PRODUCT FAMILY
D341 Family four‑wire duct smoke detector housings
- For 1Â ft. (30.5Â cm) to 10Â ft. (3Â m) ducts with air velocity between 300Â ft./min. to 4000Â ft./min. (1.52Â m/s to 20.3Â m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
250 in stock
PRODUCT FAMILY
5600 Mechanical Heat Detectors
- Post-activation indicator to easily identify units in alarm
- Multiple configurations satisfy a broad range of installations
- Broad range of back box mounting options
- Reversible mounting bracket for surface-mount or flush‑mount installations
250 in stock
PRODUCT FAMILY
D7030X Family LED annunciators
- Use with the FPA‑1000 Analog Addressable Fire Panels or FPD‑7024 FACPs
- LED indicates power, trouble, and zone status
- LED annunciates eight individual zones expandable to 64Â zones
- Aesthetically appealing appearance, mounts flush to electrical box in either surface or flush mounted configurations
- UL Listed
250 in stock
PRODUCT FAMILY
D263 Photoelectric Smoke and Smoke and Heat Detectors
- 12Â V or 24Â V input
- Designed for commercial or residential use
- Two-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
250 in stock
PRODUCT FAMILY
D340 Family two‑wire duct smoke detector housings
- For 1Â ft. (30.5Â cm) to 10Â ft. (3Â m) ducts with air velocity between 300 ft./min. to 4000 ft./min. (1.52Â m/s to 20.3Â m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
250 in stock
PRODUCT FAMILY
D342 Family four‑wire duct smoke detector housings
- For 1Â ft. (30.5cm) to 10Â ft. (3Â m) ducts with air velocity between 300Â ft./min. to 4000Â ft./min. (1.52Â m/s to 20.3Â m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
250 in stock
PRODUCT FAMILY
FPD-7024 Fire alarm control panels
- Four initiating zones (expandable to eight) with up to 20 two‑wire smoke detectors per zone
- Programmable through keypads or remote programming software (RPS) through a Conettix interface module or over the public switched telephone network (PSTN)
- Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply
- Easily converts to addressable with the addition of a MUX expansion module
- Reports to two phone numbers, two IP addresses, or a phone number and an IP address
250 in stock
Smoke detector, long-range beam, 12V
Commercial Product No. D297 | Product No. 4.998.140.350
250 in stock
Duct tube filters, 20pcs
Commercial Product No. D344-TF | Product No. 4.998.137.961
- Allow passage of smoke but restrict large particles
- Lightweight
- Easy to install
250 in stock
PRODUCT FAMILY
D273 Photoelectric Smoke and Smoke and Heat Detectors
- 12Â VDC or 24Â VDC input
- Designed for commercial or residential use
- Four-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
250 in stock
Smoke detector, long-range beam 24V
Commercial Product No. D296 | Product No. 4.998.125.869
- Operates over distances between 30Â ft (9Â m) and 350Â ft (107Â m)
- Six levels of switch-selectable sensitivity
- Built-in alignment sights and tamper protection
- Automatic range adjustment, signal synchronization, and contamination adjustment
- Remote indicator plate annunciates detector status and provides test points for voltage monitoring
250 in stock
Surface backbox, 4.75x3.25x2.25", red
Commercial Product No. FMM-100BB-R | Product No. F.01U.000.557
- Red sheet-metal back box for interior surface-mount applications
- Knockouts (1/2-inch) on the short sides
250 in stock
Break rods, scored acrylic, 12pcs
Commercial Product No. FMM-100GR | Product No. 4.998.155.098
- Scored for clean breaking
- Lightweight acrylic
- Comes in packages of 12
250 in stock
Base with sounder & form A relay, 4-wire
Commercial Product No. F220-B6RS | Product No. 4.998.112.230
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
- UL464 approved sounder driven by the detector head or the NAC circuit
250 in stock
Product subcategory
Basic functions
Showing of 28 Items
Added to Your Shopping Cart