Skip to content Skip to navigation

Bosch Security and Safety Systems | South Korea

PRODUCT FAMILY

FPD-7024 Fire alarm control panels

FPD-7024 Fire alarm control panels

Fire panel, 4-zone 24V, red enclosure

CTN FPD-7024
Product No. F.01U.008.460

Battery, 12V 7Ah

CTN D126
Product No. 4.998.125.825

A rechargeable sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions.

Annunciator, 8 alarm LED

CTN D7030X
Product No. 4.998.800.536

Eight zone LEDs indicate alarm conditions.

Annunciator, 8 LED (2 supervisory)

CTN D7030X-S2
Product No. 4.998.140.386

Two LEDs indicate supervisory conditions, six indicate alarm conditions.

Annunciator, 8 LED (8 supervisory)

CTN D7030X-S8
Product No. 4.998.140.387

All eight zone LEDs (yellow) indicate supervisory conditions.

Annunciator expander, 8 LED

CTN D7032
Product No. 4.998.140.388

Use with D7030X Family LED annunciators

Multiplex octal relay module

CTN D7035
Product No. 4.998.800.539

Provide eight Form C relay outputs (w/o enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Multiplex octal relay module + enclosure

CTN D7035B
Product No. 4.998.800.540

Provide eight Form C relay outputs (with enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Remote module, 8-input class B

CTN D7042
Product No. 4.998.800.552

Board and plastic enclosure with spring tamper

Multiplex module, metal, 8-input

CTN D7042B
Product No. 4.998.140.390

Board on mounting plate with metal enclosure

Multiplex single-input module, 12V

CTN D7044
Product No. 4.998.800.545

The module connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400 FACP. The module draws supervised input power from the FACP for use in a Class B configuration. Rotary switches allow convenient address setting.

Multiplex mini single-input module, 12V

CTN D7044M
Product No. 4.998.800.546

Connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACPs.

Multiplex smoke head

CTN D7050
Product No. 4.998.140.391

The symmetry of the D7050’s optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Within the chamber, large smoke particles scatter infrared light which is detected by a gated, high-speed, photodiode sensor.

Multiplex detector head, fixed heat

CTN D7050TH
Product No. 4.998.140.394

The D7050TH has an optical smoke chamber and a 35°F (57°C) fixed-temperature sensor. Use it in confined areas where a fire increases air temperature slowly but substantially before the fire breaks confinement.

Multiplex base, 2-wire

CTN D7050-B6
Product No. 4.998.140.392

Required base for the D7050 and D7050TH MUX smoke heads

Multiplex dual-input module, 12V

CTN D7052
Product No. 4.998.800.549

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP

Multiplex input/output module, 12V

CTN D7053
Product No. 4.998.800.550

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP in configures as either Class A or Class B configuration

USB/serial interface module

CTN DX4010V2
Product No. F.01U.080.969

Provides a local connection between compatible control panels and approved applications.

Multiplex manual station, single, red

CTN FMM-7045
Product No. F.01U.001.461

The single‑action manual station is UL listed and meets Americans with Disabilities Act (ADA) requirements. An address on the polling circuit is easily set with rotary switches. The pull-down handle locks in the activated position. It is reset by opening the unit with a key and then relocking it.

LCD annunciator and control keypad

CTN FMR-7033
Product No. F.01U.009.157

Combines remote annunciator and controller functions for fire alarm systems controlled by an FPD‑7024 Fire Alarm Control Panel

LCD annunciator keypad

CTN FMR-7036
Product No. F.01U.009.156

Four‑wire LCD annunciator keypad used with the FPD‑7024 Fire Alarm Control Panel to establish the location of a fire alarm

IDC expander, 4-point

CTN FPC-7034
Product No. F.01U.003.861

The FPC‑7034 adds four Class B (Style B) or two Class A (Style D) initiating circuits to the FPD‑7024 FACP. This plug‑in module is automatically recognized by the control panel's firmware when power is restored to the system.

Power supply, RNAC 8A 24V

CTN FPP-RNAC-8A-4C
Product No. F.01U.003.444

When connected to a panel’s option bus, the FPP-RNAC-8A-4C adds four additional NFPA 72, Class B or Class A NACs. When connected directly to the NAC output, it is also a NAC power supply for fire-protective signaling systems.

Title Type Language
Title
CSFM
Type
PDF
Language
Title
FCC
Type
PDF
Language
Title
FDNY-CoA
Type
PDF
Language
Title
FM
Type
PDF
Language
Title
UL
Type
PDF
Language
en-US 
Title
CAD Drawing DWG (FPD-7024)
Type
DWG
Language
en-US 
Title
Commercial Brochure
Type
PDF
Language
en-US 
Title
Datasheet (FPD-7024)
Type
PDF
Language
en-US 
Title
Installation manual
Type
PDF
Language
en-US  es-AR 
Title
Program Record Sheet
Type
PDF
Language
en-US  es-AR  pt-BR 
Title
Quick Selection Guide
Type
PDF
Language
en-US 
Title
Release notes
Type
PDF
Language
en-US 
Title
Special (- Smoke Detector Compatibility List)
Type
PDF
Language
en-US 
Title
Special (FPD-7024_ElecDocDownloads)
Type
PDF
Language
en-US  es-AR  pt-BR 
Title
Special (NAC Compatibility List)
Type
PDF
Language
en-US 
Title
Special (Operating instruction sheet)
Type
PDF
Language
en-US  pt-BR  es-ES 
Title
Special (Technical Bulletin - Product Issues During Installation)
Type
PDF
Language
en-US 
Title
Special (Technical Bulletin - Upgrading to FPD-7024)
Type
PDF
Language
en-US 
Title
Technical bulletin (F01U343343-01_FPD-7024_Translation_Error_TSN)
Type
PDF
Language
en-US  es-AR 
Title
Software (FPD-7024_Battery_Calculator_v1.10.03)
Type
ZIP
Language
en-US 
Title
Software (RPS v6.10.001)
Type
EXE
Language
en-US 
Title
Software (RPS-FPD7024-SP1)
Type
ZIP
Language
en-US  es-ES  fr-FR 
forward-right_adjusted