AUTODOME IP starlight 7000i

AUTODOME IP starlight 7000i
PTZ 2MP HDR 30x clear IP66 pendant
CTN NDP-7512-Z30
Product No. F.01U.352.678

AUTODOME IP starlight 7000i
PTZ 2MP HDR 30x tinted IP54 in-ceiling
CTN NDP-7512-Z30CT
Product No. F.01U.352.677

AUTODOME IP starlight 7000i
PTZ 2MP HDR 30x clear IK10 pendant
CTN NDP-7512-Z30K
Product No. F.01U.352.676
Imager | 1/2.8 in. CMOS sensor |
Effective Picture Elements (Pixels) | 1944 x 1212 (2.35 MP) |
Lens | 30x motorized Zoom4.3 mm to 129 mmF1.6 to F4.7 |
Field of View (FOV) | 2.3° to 64.7° |
Focus | Automatic with manual override |
Iris | Automatic with manual override |
Digital Zoom | 12x |
Day/Night switch | Automatic IR cut filter |
Color | 0.0077 lx |
Monochrome | 0.0008 lx |
High dynamic range | 120 dB WDR |
Measured according to IEC 62676 Part 5 | 100 dB WDR |
Gain control | AGC, Fixed, Region per pre-position |
Aperture Correction | Horizontal and vertical |
Electronic Shutter Speed (AES) | 1/1 sec to 1/30,000 sec (22 steps) |
Signal-to-Noise Ratio (SNR) | >55 dB |
Backlight compensation (BLC) | On / Off / Intelligent Auto Exposure (IAE) |
White balance | 2000 K to 10,000 K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp, indoor, outdoor |
Day/Night | Monochrome, Color, Auto |
Defog mode feature | Improves visibility when viewing foggy or other low-contrast scenes. |

Midspan, 60W, single port, AC in
CTN NPD-6001B
Product No. F.01U.347.358
60 W indoor midspan for cameras without illuminators

PSU, 120VAC, for AUTODOME, MIC7000
CTN VG4-A-PSU1
Product No. F.01U.261.377
Power supply for AUTODOME 7000, MIC IP cameras without illuminators.
120VAC in, 24VAC out

Power supply, 230VAC, AUTODOME, MIC7000
CTN VG4-A-PSU2
Product No. F.01U.009.668
Power supply for AUTODOME 7000, MIC IP cameras without illuminators.
230VAC in, 24VAC out

Cover for AUTODOME power supply box
CTN VGA-SBOX-COVER
Product No. F.01U.010.505
Cover for AUTODOME Power Supply Boxes, white

Ethernet to SFP interface kit
CTN VG4-SFPSCKT
Product No. F.01U.142.529
Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras, for MIC-IP-PSU for MIC analog cameras and for the Surveillance cabinets (NDA-U-PA0, NDA-U-PA1 and NDA-U-PA2).

Fiber module, multimode, 1310nm, 2LC
CTN SFP-2
Product No. F.01U.136.537
SFP Fiber Optic Module, 2 km (1.2 miles), 2 LC connectors.
Multi-mode
1310 mm

Fiber module, single-mode, 1310nm, 2LC
CTN SFP-3
Product No. F.01U.136.538
SFP Fiber Optic Module, 20 km (12.4 miles), 2 LC connectors.
Single-mode
1310 nm

Fiber module, 1310/1550nm, 1SC
CTN SFP-25
Product No. F.01U.136.541
SFP Fiber Optic Module, 2 km (1.2 miles), 1 SC connector
Multi-mode
1310/1550 nm

Fiber module, 1550/1310nm, 1SC
CTN SFP-26
Product No. F.01U.136.542
SFP Fiber Optic Module, 2 km (1.2 miles), 1 SC connector
Multi-mode
1550/1310 nm

Pendant arm, power box, 120VAC, AUTODOME
CTN VG4-A-PA1
Product No. F.01U.261.374
Pendant arm mount with power supply box for an AUTODOME Series camera with a 120 VAC transformer, white

Mounting plate for VGA-PEND-ARM
CTN VGA-PEND-WPLATE
Product No. F.01U.247.809
Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera

Roof parapet mount for AUTODOME series
CTN VGA-ROOF-MOUNT
Product No. F.01U.247.811
Roof parapet mount, white
VG5-6xx/7xxx cameras require VG4-A-9543 Pipe Mount (sold separately).
NEZ-5130-/NEZ-5230- cameras require NDA-ADPTR-NPTMET (sold separately)

Parapet roof mount adapter
CTN LTC 9230/01
Product No. F.01U.503.630
Flat Roof Mount Adapter for mounting a unit in an upright position on a flat surface.

Pole mount adapter
CTN VG4-A-9541
Product No. F.01U.123.433
Pole mount adapter for an AUTODOME pendant arm or a DINION imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white

Corner mount adapter for AUTODOME
CTN VG4-A-9542
Product No. F.01U.123.434
Corner mount adapter for an AUTODOME pendant arm or a DINION imager

Pipe mount for AUTODOME , white
CTN VG4-A-9543
Product No. F.01U.009.673
Pipe mount, white, for an AutoDome Series pendant housing

Suspended ceiling support kit,7"
CTN VGA-IC-SP
Product No. F.01U.245.271
Suspended ceiling support kit for dome cameras. Aperture Ø177 mm (Ø7 in). Maximum supported weight 11.3 kg (25 lb).

Bubble, in-ceiling, large, clear
CTN VGA-BUBLRG-CCLA
Product No. F.01U.283.457
High-resolution bubble for AUTODOME in-ceiling cameras, clear

Bubble, in-ceiling, tinted
CTN VGA-BUBHD-CTIA
Product No. F.01U.281.738
High-resolution acrylic bubble for AUTODOME HD in-ceiling cameras, tinted

Bubble, pendant, IK10-rated
CTN VGA-BUBBLE-IK10
Product No. F.01U.315.882
IK10-rated bubble qualified for use with AUTODOME 7000 HD cameras with pendant housings

Pendant arm, power box, 24VAC, AUTODOME
CTN VG4-A-PA0
Product No. F.01U.009.671
Pendant arm mount with power supply box for an AUTODOME Series camera, no transformer, white

Pendant arm, power box, 230VAC, AUTODOME
CTN VG4-A-PA2
Product No. F.01U.009.664
Pendant arm mount with power supply box for an AUTODOME Series camera with a 230 VAC transformer, white

License key for serial protocol
CTN MVS-FCOM-PRCL
Product No. F.01U.314.101
Serial Protocol Software License (e-license) for IP Cameras

NTCIP for moving cameras
CTN MVS-FNTCIP
Product No. F.01U.329.682
NTCIP license for moving cameras
Available in NAM region only.

Pendant arm with wiring, for AUTODOME
CTN VGA-PEND-ARM
Product No. F.01U.261.947
Compatible with an AutoDome Series pendant housing