Fiber Optic Media Converters

Fiber Optic Media Converters
ETHERNET TO SFP INTERFACE KIT
CTN VG4-SFPSCKT
Product No. F.01U.142.529

Fiber Optic Media Converters
Media converter with SFP socket
CTN CNFE2MC/IN
Product No. F.01U.136.545

Fiber Optic Media Converters
Fiber module, multimode, 1310nm, 2LC
CTN SFP-2
Product No. F.01U.136.537

Fiber Optic Media Converters
Fiber module, single-mode, 1310nm, 2LC
CTN SFP-3
Product No. F.01U.136.538
Description | Fiber Optic Ethernet Media Converter kit.Requires a small form-factor pluggable (SFP) module (sold separately). |
Data Interface | Ethernet |
Data Rate | 10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
Compatible Receiver | CNFE2MC/IN |
Installation | Installed inside a NDA-U-PAx, VG4-A-PAx or a VG4-A-PSUx power supply box, or in a MIC IP PSU, with supplied mounting hardware. Note: Wiring for the VG4-SFPSCKT must be routed through the proper conduit opening on the power supply box. Refer to the installation guide that accompanies the module. |
Green | Power is applied, fiber link is valid. |
Red | Power is applied, fiber link is missing. |
Green/Flashing Red, rapid | Power is applied.Fiber link is valid.Data is present and video is streaming from the camera to a network connection. |
Green/Flashing Red, slow | Power is applied.Fiber link is valid.Data is present.Video is not streaming from the camera, or the RJ45 connection to the camera is not valid. |
Right side, Flashing Green | Data is present. |
Right side, Off | No data is present. |
Left side, Amber | Link is valid at 100 MB. |
Left side, Off | If the right side is flashing green, link is valid at 10 MB. |
No LED lit | The network cable is missing, is defective, or the other end of the network cable is not connected. |
Power | 24 VAC @ 220 mA (supplied by the camera) |
Current Protection | Automatic resettableSolid-state current limiters |
Circuit Board | Meets IPC Standard. |
Dimensions (LxWxH) | 7.4 x 7.1 x 3.8 cm (2.9 x 2.8 x 1.5 in.) |
Shipping Weight | 0.91 kg (2 lb) |
MTBF | > 100,000 hours |

Blank panel for rack mount card cage
CTN C1-BP
Product No. F.01U.136.544
Blank panel for C1 rack mount card cage, 1 slot width (1 in.)