Bosch Security and Safety Systems | China
- 多行
- CSV
- 複製粘貼
-
You can insert an error message here. 如何準備要復制的單元格
輸入所需的物料編號和數量,然後單擊“上載”。輸入的產品和數量將顯示在標籤“添加多個項目”中,供您查看,然後在“添加到購物車”上單擊鼠標右鍵。
例
- 2608630030
- F00Y100947 5
- F00Y100947;5
- 2608630030 12
- 2608630030;10
複製並粘貼準備好的單元格
- 主頁
- 產品展示
- Fire Alarm Systems - UL, ULC, FM
- Conventional Products
-
快速添加
- 多行
- CSV
- 複製粘貼
-
You can insert an error message here. 如何準備要復制的單元格
輸入所需的物料編號和數量,然後單擊“上載”。輸入的產品和數量將顯示在標籤“添加多個項目”中,供您查看,然後在“添加到購物車”上單擊鼠標右鍵。
例
- 2608630030
- F00Y100947 5
- F00Y100947;5
- 2608630030 12
- 2608630030;10
複製並粘貼準備好的單元格
產品子類別
基本功能
2 接線/4 接線空調風管專用煙霧感測頭 12/24V
CTN D285DH| Product No. 4.998.140.344
- Commercial or residential applications
- Two-wire or four-wire application, depending on base
- Chamber Check rapid-flash LED Automatic Trouble Indication reports contaminated chamber
- Flashing LED power indicator
- Steady-On LED alarm indicator
- Modular design
4 接線底座附聲音警報器及 A 接點繼電器
CTN F220-B6RS| Product No. 4.998.112.230
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
- UL464 approved sounder driven by the detector head or the NAC circuit
產品系列
5600 Mechanical Heat Detectors
- Post-activation indicator to easily identify units in alarm
- Multiple configurations satisfy a broad range of installations
- Broad range of back box mounting options
- Reversible mounting bracket for surface-mount or flush‑mount installations
8 LED 通報裝置擴展器
CTN D7032| Product No. 4.998.140.388
- Provides eight remote LEDs
- Easy cable connection to D7030X LED Annunciators
- Easy connection to option bus
CO 濃度偵測器 (Macurco CM-E1)
CTN FCC-380| Product No. F.01U.172.606
- Solid state sensor provides maintenance-free operation
- Microcomputer control provides virtual automatic operation
- 9 VDC to 32 VDC operation is compatible with 12 V and 24 V systems
- Can quickly test CO sensor on site
- Three-color LED status display
- Four‑wire technology for connection to any UL Listed control panel
產品系列
D340 Family two‑wire duct smoke detector housings
- For 1 ft. (30.5 cm) to 10 ft. (3 m) ducts with air velocity between 300 ft./min. to 4000 ft./min. (1.52 m/s to 20.3 m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
產品系列
D342 Family four‑wire duct smoke detector housings
- For 1 ft. (30.5cm) to 10 ft. (3 m) ducts with air velocity between 300 ft./min. to 4000 ft./min. (1.52 m/s to 20.3 m/s)
- Easy duct tube installation through the housing cuts installation time
- Detector test and reset without removing covers
- Clear cover allows quick visual inspection
- Tube filters, dust immune smoke detector, and easy disassembly for cleaning reduce maintenance time and cost
產品系列
D7030X Family LED annunciators
- Use with the FPA‑1000 Analog Addressable Fire Panels or FPD‑7024 FACPs
- LED indicates power, trouble, and zone status
- LED annunciates eight individual zones expandable to 64 zones
- Aesthetically appealing appearance, mounts flush to electrical box in either surface or flush mounted configurations
- UL Listed
產品系列
D7035 Octal Relay Modules
- Provides eight Form C programmable relay outputs
- Module connects to the FACP’s option bus
- D7035 mounts conveniently inside the FACP enclosure with no separate enclosure needed
- D7035B includes mounting skirt and enclosure for mounting outside of the FACP enclosure
- Up to two modules are supported by the FACP
產品系列
F220‑B6 Conventional detector bases
- Easy installation
- Interchangeable detector heads
- UL listed when used with a detector from the F220 family
產品系列
FMM‑100 Family Die‑cast Metal Fire Alarm Manual Stations
- Single or dual action
- Terminal connections
- Gold‑plated alarm contacts for corrosion resistance
- Surface or weatherproof back boxes
產品系列
FMM‑100 Family Single‑action, Die‑cast Metal Manual Stations
- Terminal connections
- Gold‑plated alarm contacts for corrosion resistance
- Surface- or flush‑mounted back boxes
- Optional labels
產品系列
FPD-7024 Fire alarm control panels
- Four initiating zones (expandable to eight) with up to 20 two‑wire smoke detectors per zone
- Programmable through keypads or remote programming software (RPS) through a Conettix interface module or over the public switched telephone network (PSTN)
- Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply
- Easily converts to addressable with the addition of a MUX expansion module
- Reports to two phone numbers, two IP addresses, or a phone number and an IP address
IDC 擴展器,4 點
CTN FPC-7034| Product No. F.01U.003.861
- Adds four Class B (Style B) or Class A (Style D) initiating circuits to the FPD‑7024 FACP
- For use with normally‑open (NO) or normally‑closed (NC) alarm contacts
- Compatible with two‑wire or four‑wire smoke detectors
- Up to 20 two‑wire smoke detectors per circuit
- Easy installation due to plug‑in design and screw terminal circuit connections
- No programming necessary
LCD 通報裝置鍵盤
CTN FMR-7036| Product No. F.01U.009.156
- Two‑line, 16‑character LCD display
- On‑board LEDs indicate Silenced, Trouble, Alarm, and Supervisory
- Silence and Reset buttons
- Built‑in keyswitch
- Attractive, low‑profile enclosure
LCD 通報裝置附控制鍵盤
CTN FMR-7033| Product No. F.01U.009.157
- Compatible with the FPD‑7024 FACP
- Two‑line, 32‑character, alphanumeric LCD display
- Status LEDs identify alarm, trouble, supervisory, and silenced conditions
- Address setting by jumper
- Remotely control system commands and programming
- Passcode protection controls system access
- Low profile design
反射光束感應煙霧偵測器
CTN FIRERAY5000-UL| Product No. F.01U.290.198
- Extended monitoring range
- Up to 2 detectors per system controller
- Two pairs of fire and fault relays (one per detector)
- Transmitter and receiver integrated into a compact housing
- Integral LASER alignment
- Self-alignment during operation
- Remote control unit at eye level for easy installation and programming
- Automatic contamination compensation
- Control unit with LED and LCD displaying - various operating states
- Adjustable alarm thresholds
- Building shift compensation
平貼式背殼 4.75x3.25x2.25 吋,紅色
CTN FMM-100BB-R| Product No. F.01U.000.557
- Red sheet-metal back box for interior surface-mount applications
- Knockouts (1/2-inch) on the short sides
擊碎棒,刻紋壓克力材質 12 件
CTN FMM-100GR| Product No. 4.998.155.098
- Scored for clean breaking
- Lightweight acrylic
- Comes in packages of 12
易燃性氣體偵測器 12/24V
CTN D382| Product No. 4.998.800.524
- 12 VDC/VAC or 24 VDC/VAC operation
- Self-purging semiconductor sensor requires no maintenance or recalibration
- SPDT (Form C) alarm Relay and SPST (Form A) trouble relay designed for seamless connection to control panels or other devices
- Installer selectable self-restoring or latching functionality
- Red and Green LED status indicators
遠程指示燈座
CTN D344-RL| Product No. 4.998.140.354
- Highly‑visible LED indicators
- Sensitivity voltage test point
- Easily mounted and wired
- Attractive faceplate
遠程測試/指示燈座 24V
CTN D344-RT| Product No. F.01U.024.868
- Highly‑visible LED indicators
- Sensitivity voltage test point
- Easily mounted and wired
- Key-operated remote test and reset
遠距光束感應煙霧偵測器 24V
CTN D296| Product No. 4.998.125.869
- Operates over distances between 30 ft (9 m) and 350 ft (107 m)
- Six levels of switch-selectable sensitivity
- Built-in alignment sights and tamper protection
- Automatic range adjustment, signal synchronization, and contamination adjustment
- Remote indicator plate annunciates detector status and provides test points for voltage monitoring
防風雨耐候背殼 4.75x3.25x2.25 吋,紅色
CTN FMM-100WPBB-R| Product No. F.01U.000.561
- Weatherproof cast metal back box
- Tapped hole for ¾‑in. NPT fitting
- Easy to install
產品系列
D263 Photoelectric Smoke and Smoke and Heat Detectors
- 12 V or 24 V input
- Designed for commercial or residential use
- Two-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
產品系列
D273 Photoelectric Smoke and Smoke and Heat Detectors
- 12 VDC or 24 VDC input
- Designed for commercial or residential use
- Four-wire application
- Light-emitting diodes (LEDs) indicate the status of the chamber, power, and alarm
- Removable terminal block to simplify wiring connections
- Cable connection point for voltmeter sensitivity test
- Trim Plate TP280 for retrofit and remodeling purposes
產品系列
F220 Heat Detectors
- Two-wire or four-wire bases
- 50 ft. (15.2 m) maximum spacing between detectors
- Visible identification of model: F220-135 / F220-135F = gray ring, F220‑190F = black ring
- Tamper detection
- Dual-color LED
產品系列
F220 Photoelectric Smoke Detectors
- Two-wire or four-wire bases
- 30 ft. (9 m) maximum spacing between detectors
- Optional CO-sensor, heat-sensor enhanced detection chamber
- Clean chamber without removal or disassembly
- CleanMe signaling capability
- Sensitivity readout on detector
- Detector chamber compensates for dust build-up
- Tamper protection
- Dual-color LED