跳到內容 跳到導航

博世智能建築科技

產品系列

FPD-7024 Fire alarm control panels

FPD-7024 Fire alarm control panels

4 分區 24V 火警控制主機,紅色外殼

CTN FPD-7024
產品編號 F.01U.008.460

Line impedance for ground fault detection (Option Bus, conventional input, NAC, secondary power circuit, MUX Bus, AUX power, SMK power) 10 kΩ or less
Power (non-resettable Input) 120 V 60 Hz 1.4 A or 230/240 V 50 Hz, 0.7 A
Power (non‑resettable Auxiliary) 17 to 31 VRMS, unfiltered, 1.0 A
Power (resettable Smoke)1 20.4 to 28.2 VDC nominal, filtered, 1.0 A.
Power (Option Bus) 12 VDC nominal, 500 mA
Power (Notification Appliance Circuit [NAC])2 Each NAC has 24 VRMS nominal, unfiltered power with up to 2.5 A capacity (but limited by the panel’s overall 4.0 A capacity)
Power (Optional Standby Batteries) Two 12 V (in series), 7 Ah to 40 Ah
NACs Line Impedance (voltage loss) 1.5 V
Recommended battery manufacturers3 Power Sonic: PS-1270, PS-12170, PS-12180YUASA: NP7-12, NPG18-12
Temperature (operating and storage) +32°F to +120°F (0°C to +49°C)
Wiring Class B or Class A
Notification patterns Configurable for steady, pulsing, California March, Temporal (ANSI) code 3, synchronized Wheelock, synchronized Gentex, and synchronized System Sensor.
Local (on-board) The main control panel includes Three Form C relays. The relay contacts are rated at 5 A, 28 VDC. No over current limiting is performed on the contacts of the relays. The default selection for the relays is to indicate general alarm (relay 1), general system trouble (relay 2), and supervisory (relay 3). By using point or zone mapping, they can be programmed to activate in a wide variety of conditions.
Remote4 Eight Form C relay outputs are provided by a D7035 Remote Relay Module. The module connects to the FACP through the option bus. The outputs are fully programmable, exactly as the local relays are programmed. Each output operates independently of the other seven to provide complete flexibility. Communication with the D7035 is supervised. Contact Rating: 5 A at 28 VDCNumber of Modules: two modules maximum.

乙太網路通訊模組

CTN B426
產品編號 F.01U.324.383

支援透過Ethernet與相容的 Control Panels 進行雙向通訊

電池,12V 7Ah

CTN D126
產品編號 4.998.125.825

可充電密封式鉛酸電源供應器,做為備用電源供應器或是在輔助或附加功能當中使用。

8 警示 LED 通報裝置

CTN D7030X
產品編號 4.998.800.536

Eight zone LEDs indicate alarm conditions.

8 LED 通報裝置 (2 監控)

CTN D7030X-S2
產品編號 4.998.140.386

Two LEDs indicate supervisory conditions, six indicate alarm conditions.

8 LED 通報裝置 (8 監控)

CTN D7030X-S8
產品編號 4.998.140.387

All eight zone LEDs (yellow) indicate supervisory conditions.

8 LED 通報裝置擴展器

CTN D7032
產品編號 4.998.140.388

Use with D7030X Family LED annunciators

8 路繼電器多工模組

CTN D7035
產品編號 4.998.800.539

Provide eight Form C relay outputs (w/o enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

停產

多工擴充模組

CTN D7039
產品編號 4.998.800.529

The D7039 enhances the conventional features of the D7024 or FPD‑7024 FACPs by increasing the number of addressable points to 256, the number of relay outputs to 58 on the D7024 or 59 on FPD‑7024, the number of events on the history buffer to 499, and the number of users to 100.

B 類 8 路輸入遠程模組

CTN D7042
產品編號 4.998.800.552

Board and plastic enclosure with spring tamper

單路輸入多工模組 12V

CTN D7044
產品編號 4.998.800.545

The module connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400 FACP. The module draws supervised input power from the FACP for use in a Class B configuration. Rotary switches allow convenient address setting.

迷你型單路輸入多工模組 12V

CTN D7044M
產品編號 4.998.800.546

Connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACPs.

多工煙霧感測頭

CTN D7050
產品編號 4.998.140.391

The symmetry of the D7050’s optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Within the chamber, large smoke particles scatter infrared light which is detected by a gated, high-speed, photodiode sensor.

恆溫感應多工偵測器感測頭

CTN D7050TH
產品編號 4.998.140.394

The D7050TH has an optical smoke chamber and a 35°F (57°C) fixed-temperature sensor. Use it in confined areas where a fire increases air temperature slowly but substantially before the fire breaks confinement.

2 接線多工底座

CTN D7050-B6
產品編號 4.998.140.392

Required base for the D7050 and D7050TH MUX smoke heads

雙路輸入多工模組 12V

CTN D7052
產品編號 4.998.800.549

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP

輸入/輸出多工模組 12V

CTN D7053
產品編號 4.998.800.550

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP in configures as either Class A or Class B configuration

USB/序列介面模組

CTN DX4010V2
產品編號 F.01U.080.969

提供相容 Control Panels 與核准應用領域之間的本地連接。

多工單作用人工操作站,紅色

CTN FMM-7045
產品編號 F.01U.001.461

The single‑action manual station is UL listed and meets Americans with Disabilities Act (ADA) requirements. An address on the polling circuit is easily set with rotary switches. The pull-down handle locks in the activated position. It is reset by opening the unit with a key and then relocking it.

LCD 通報裝置附控制鍵盤

CTN FMR-7033
產品編號 F.01U.009.157

Combines remote annunciator and controller functions for fire alarm systems controlled by an FPD‑7024 Fire Alarm Control Panel

LCD 通報裝置鍵盤

CTN FMR-7036
產品編號 F.01U.009.156

Four‑wire LCD annunciator keypad used with the FPD‑7024 Fire Alarm Control Panel to establish the location of a fire alarm

IDC 擴展器,4 點

CTN FPC-7034
產品編號 F.01U.003.861

The FPC‑7034 adds four Class B (Style B) or two Class A (Style D) initiating circuits to the FPD‑7024 FACP. This plug‑in module is automatically recognized by the control panel's firmware when power is restored to the system.

FPD-7024 用多工擴充模組

CTN FPE-7039
產品編號 F.01U.299.029

It enhances the features of the FACPs. It increases the number of addressable points to 247. It increases the number of relay outputs to 58 on the D7024/DS9400 or 59 on the FPD‑7024. It increases number of events on the history buffer to 499.

RNAC 電源供應器 8A 24V

CTN FPP-RNAC-8A-4C
產品編號 F.01U.003.444

When connected to a panel’s option bus, the FPP-RNAC-8A-4C adds four additional NFPA 72, Class B or Class A NACs. When connected directly to the NAC output, it is also a NAC power supply for fire-protective signaling systems.

標題 文件類型 語言
標題
CSFM
文件類型
PDF
語言
標題
FCC
文件類型
PDF
語言
標題
FDNY-CoA
文件類型
PDF
語言
標題
FM
文件類型
PDF
語言
標題
UL
文件類型
PDF
語言
en-US 
標題
CAD 圖檔 DWG (FPD-7024)
文件類型
DWG
語言
en-US 
標題
商業手冊
文件類型
PDF
語言
en-US 
標題
安裝手冊
文件類型
PDF
語言
en-US  es-AR 
標題
快速選購指南
文件類型
PDF
語言
en-US 
標題
技術服務公告 (F01U343343-01_FPD-7024_Translation_Error_TSN)
文件類型
PDF
語言
en-US  es-AR 
標題
特刊 (- Smoke Detector Compatibility List)
文件類型
PDF
語言
en-US 
標題
特刊 (FPD-7024_ElecDocDownloads)
文件類型
PDF
語言
en-US  es-AR  pt-BR 
標題
特刊 (NAC Compatibility List)
文件類型
PDF
語言
en-US 
標題
特刊 (Operating instruction sheet)
文件類型
PDF
語言
en-US  pt-BR  es-ES 
標題
特刊 (Technical Bulletin - Product Issues During Installation)
文件類型
PDF
語言
en-US 
標題
特刊 (Technical Bulletin - Upgrading to FPD-7024)
文件類型
PDF
語言
en-US 
標題
發行資訊
文件類型
PDF
語言
en-US 
標題
程式記錄單
文件類型
PDF
語言
en-US  es-AR  pt-BR 
標題
資料表 (FPD-7024)
文件類型
PDF
語言
en-US 
標題
Software (FPD-7024_Battery_Calculator_v1.10.03)
文件類型
ZIP
語言
en-US 
標題
Software (RPS v6.10.001)
文件類型
EXE
語言
en-US 
標題
Software (RPS-FPD7024-SP1)
文件類型
ZIP
語言
en-US  es-ES  fr-FR 
forward-right_adjusted