AUTODOME IP starlight 7000 HD (1080p)
AUTODOME IP starlight 7000 HD (1080p)
PTZ 2MP HDR 30x tinted IP54 in-ceiling
Commercial Type No. VG5-7230-CPT5
Product No. F.01U.321.425
AUTODOME IP starlight 7000 HD (1080p)
PTZ 2MP HDR 30x clear IP66 pendant
Commercial Type No. VG5-7230-EPC5
Product No. F.01U.321.422
AUTODOME IP starlight 7000 HD (1080p)
PTZ 2MP HDR 30x clear IK10 pendant
Commercial Type No. VG5-7230-EPR5
Product No. F.01U.321.423
| Imager | 1/2.8-type Exmor R CMOS sensor |
| Effective Picture Elements (Pixels) | 1945 x 1097 (2.13 MP) |
| Lens | 30x motorized Zoom4.3 mm to 129 mmF1.6 to F4.7 |
| Field of View (FOV) | 2.3° to 63.7° |
| Focus | Automatic with manual override |
| Iris | Automatic with manual override |
| Digital Zoom | 12x |
| Color | 0.0077Â lx |
| Monochrome | 0.0008Â lx |
| Gain control | AGC, Fixed |
| Aperture Correction | Horizontal and vertical |
| Electronic Shutter Speed (AES) | 1/1 sec to 1/10000 sec (22 steps) |
| Signal-to-Noise Ratio (SNR) | >55Â dB |
| Day/Night switch | Automatic IR cut filter |
| Backlight compensation (BLC) | On / Off / Intelligent Auto Exposure (IAE) |
| White balance | 2000Â K to 10,000Â K ATW, AWB Hold, Extended ATW, Manual, Sodium Lamp Auto, Sodium Lamp |
| Day/Night | Monochrome, Color, Auto |
| Defog mode feature | Improves visibility when viewing foggy or other low-contrast scenes. |
| High dynamic range | 120 dB WDR |
| Measured according to IEC 62676 Part 5 | 100 dB WDR |
High PoE midspan
Commercial Type No. NPD-6001B
Product No. F.01U.347.358
High PoE Midspan, 60 W, single port, AC in for AUTODOME 7000 cameras and for MIC7000 cameras without illuminators.
Midspan, high PoE, single port, AC in
Commercial Type No. NPD-9501A
Product No. F.01U.286.250
High PoE, 95 W, Single port indoor Midspan. 120/230VAC input. Supplies a data and power interface to camera using a single standard CAT5e (or better) network cable.
PSU, 120VAC, for AUTODOME, MIC7000
Commercial Type No. VG4-A-PSU1
Product No. F.01U.261.377
Power supply, 120VAC input, 24VAC output @ 96VA.
Suitable for powering AUTODOME, MIC IP 7000, and MIC IP fusion 9000i cameras. White aluminum enclosure with cover. IP66 ingress. IK10 impact.
Power supply, 230VAC, AUTODOME, MIC7000
Commercial Type No. VG4-A-PSU2
Product No. F.01U.261.378
Power supply for AUTODOME 7000, MIC IP cameras without illuminators.
230VAC in, 24VAC out
Cover for AUTODOME power supply box
Commercial Type No. VGA-SBOX-COVER
Product No. F.01U.010.505
Cover for AUTODOME Power Supply Boxes, white
ETHERNET TO SFP INTERFACE KIT
Commercial Type No. VG4-SFPSCKT
Product No. F.01U.142.529
Ethernet media converter video transmitter/data receiver fiber optic kit for AUTODOME cameras, for MIC-IP-PSU for MIC analog cameras and for the Surveillance cabinets (NDA-U-PA0, NDA-U-PA1 and NDA-U-PA2).
Fiber module, multimode, 1310nm, 2LC
Commercial Type No. SFP-2
Product No. F.01U.136.537
SFP Fiber Optic Module, 2Â km (1.2Â miles), 2Â LC connectors.
Multi-mode
1310 mm
Fiber module, single-mode, 1310nm, 2LC
Commercial Type No. SFP-3
Product No. F.01U.136.538
SFP Fiber Optic Module, 20Â km (12.4Â miles), 2Â LC connectors.
Single-mode
1310Â nm
Fiber module, 1310/1550nm, 1SC
Commercial Type No. SFP-25
Product No. F.01U.136.541
SFP Fiber Optic Module, 2Â km (1.2Â miles), 1Â SC connector
Multi-mode
1310/1550Â nm
Fiber module, 1550/1310nm, 1SC
Commercial Type No. SFP-26
Product No. F.01U.136.542
SFP Fiber Optic Module, 2Â km (1.2Â miles), 1Â SC connector
Multi-mode
1550/1310Â nm
Pendant arm, power box, 24VAC, AUTODOME
Commercial Type No. VG4-A-PA0
Product No. F.01U.261.373
Pendant arm mount with power supply box for an AUTODOME Series camera, no transformer, white
Pendant arm, power box, 120VAC, AUTODOME
Commercial Type No. VG4-A-PA1
Product No. F.01U.261.374
Pendant arm mount with power supply box for an AUTODOME Series camera with a 120 VAC transformer, white
Pendant arm, power box, 230VAC, AUTODOME
Commercial Type No. VG4-A-PA2
Product No. F.01U.261.375
Pendant arm mount with power supply box for an AUTODOME Series camera with a 230 VAC transformer, white
Pendant arm with wiring, for AUTODOME
Commercial Type No. VGA-PEND-ARM
Product No. F.01U.261.947
Compatible with an AutoDome Series pendant housing
Mounting plate for VGA-PEND-ARM
Commercial Type No. VGA-PEND-WPLATE
Product No. F.01U.247.809
Mounting plate for VGA-PEND-ARM, compatible with an AutoDome Series camera
Roof parapet mount for AUTODOME series
Commercial Type No. VGA-ROOF-MOUNT
Product No. F.01U.247.811
Roof parapet mount, white
VG5-6xx/7xxx cameras require VG4-A-9543 Pipe Mount (sold separately).
NEZ-5130-/NEZ-5230- cameras require NDA-ADPTR-NPTMET (sold separately)
Roof mount adapter
Commercial Type No. LTC 9230/01
Product No. F.01U.503.630
Flat Roof Mount Adapter for mounting a unit in an upright position on a flat surface.
Pole mount adapter
Commercial Type No. VG4-A-9541
Product No. F.01U.123.433
Pole mount adapter for an AUTODOME pendant arm or a DINION imager, designed for poles with a diameter of 100‑380 mm (4‑15 in.), white
Corner mount adapter for AUTODOME
Commercial Type No. VG4-A-9542
Product No. F.01U.123.434
Corner mount adapter for an AUTODOME pendant arm or a DINION imager
Pipe mount for AUTODOME , white
Commercial Type No. VG4-A-9543
Product No. F.01U.009.673
Pipe mount, white, for an AutoDome Series pendant housing
Suspended ceiling support kit,7"
Commercial Type No. VGA-IC-SP
Product No. F.01U.245.271
Suspended ceiling support kit for dome cameras. Aperture Ø177 mm (Ø7 in). Maximum supported weight 11.3 kg (25 lb).
Trim skirt for AUTODOME power supply box
Commercial Type No. VG4-A-TSKIRT
Product No. F.01U.201.236
Trim skirt for the following AutoDome Series power supply boxes: VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2
Bubble, pendant, clear
Commercial Type No. VGA-BUBBLE-PCLA
Product No. F.01U.247.818
Low-impact acrylic bubble
Bubble, pendant, tinted
Commercial Type No. VGA-BUBBLE-PTIA
Product No. F.01U.247.820
Low-impact acrylic bubble
Bubble, in-ceiling, large, clear
Commercial Type No. VGA-BUBLRG-CCLA
Product No. F.01U.283.457
High-resolution bubble for AUTODOME in-ceiling cameras, clear
Bubble, in-ceiling, large, tinted
Commercial Type No. VGA-BUBLRG-CTIA
Product No. F.01U.283.404
High-resolution bubble for AUTODOME in-ceiling cameras, tinted
Bubble, in-ceiling, tinted
Commercial Type No. VGA-BUBHD-CTIA
Product No. F.01U.281.738
High-resolution acrylic bubble for AUTODOME HD in-ceiling cameras, tinted
Bubble, pendant, IK10-rated
Commercial Type No. VGA-BUBBLE-IK10
Product No. F.01U.315.882
IK10-rated bubble qualified for use with AUTODOME 7000 HD cameras with pendant housings
Power supply, 24VAC
Commercial Type No. VG4-A-PSU0
Product No. F.01U.261.376
Power supply, 24Â VAC input, for a PTZ camera in the AUTODOME Series. White, aluminum enclosure with cover, rated IP66 and IK 08. 100Â W output. Optional trim skirt (sold separately).