D7412GV4 Control Panel
Telephone Connection: | One telephone line D928 Dual Phone Line Module required for two telephone lines |
Relative Humidity: | 5% to 93% at +30°C (+86°F), non‑condensing |
Temperature (Operating): | 0°C to +50°C (+32°F to +122°F) |
Areas: | 8 |
Card Readers (Doors): | 2 |
Credentials (Tokens): | 399 |
Custom Functions: | 4 |
Events: | Up to 1000 |
Passcode Users: | 399, plus 1 service passcode |
Parallel Printers: | 1 |
Points: | 75 (8 on‑board, up to 67 off‑board) |
Programmable Relay Outputs: | 67 |
RF Points: | 67 |
SKEDs: | 40 |
Current Draw (Maximum): | 300Â mA |
Output (Alarm): | 2Â A at 12Â VDC |
Output (Auxiliary, Continuous Power, and Switched Auxiliary combined): | 1.4Â A at 12Â VDC nominal |
Voltage (Operating): | 12Â VDC nominal |
Voltage (AC): | 16.5 VAC 40 VA plug‑in transformer (D1640) |

Dual phone line switcher, 12V
CTN D928
Product No. 4.998.800.206
Allows the control panel to operate over and supervise two separate phone lines. Only one D162 phone cord is supplied. Two additional D161 or D162 phone cords are required.

Enclosure lock and key set
CTN D101
Product No. 4.998.800.200
Short-body lock set with one key supplied. Uses the D102 (#1358) replacement key.

Dual battery harness
CTN D122
Product No. 4.998.800.378
Harness with circuit breaker. Connects two batteries (in parallel) to a compatible control panel.

Dual battery harness, long
CTN D122L
Product No. 4.998.140.606
Harness with circuit breaker and leads measuring 35Â in. (89Â cm). Connects two batteries (in parallel) to a compatible control panel in a separate enclosure.

Battery, 12V 7Ah
CTN D126
Product No. 4.998.125.825
A rechargeable sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions.

Battery, 12V 18Ah
CTN D1218
Product No. 4.998.125.820
The D1218 is a 12 V 18 Ah sealed lead‑acid battery with two bolt-fastened terminals. It is used for standby and auxiliary power. It connects to a compatible control panel using a D122 or D122L Dual battery harness.

Accessory mounting bracket for enclosure
CTN D137
Product No. F.01U.020.521
Used to mount accessory modules in B8103, D8103, D8108A, and D8109 enclosures.

Transformer plug-in, 16V 40VA
CTN D1640
Product No. 4.998.125.832
System transformer rated at 16.5Â VAC, 40Â VA.

Transformer enclosure kit, grey
CTN D8004
Product No. 4.998.140.404
For applications that might require a remote transformer in an enclosure. Can be used with B Series control panels and D9412GV4/D7412GV4 control panels.

Mounting plate, 6 location 3-hole, 5 pcs
CTN D9002-5
Product No. F.01U.217.699
5 pack of mounting skirts for B8103, D8103, D8108A, and D8109 enclosures. Each skirt can hold up to six standard 3-hole mounting modules.

Tamper switch for enclosure, 2pcs
CTN D110
Product No. F.01U.246.707
Screw‑on tamper switch that fits all enclosures. Shipped in packages of two.

Dual tamper switch
CTN ICP-EZTS
Product No. F.01U.217.038
Combination tamper switch with a wire loop for additional tamper outputs.

Attack resistant enclosure, large, grey
CTN D8108A
Product No. 4.998.125.920
Grey steel enclosure measuring 41.5Â cm x 41.5Â cm x 9Â cm (16Â in. x 16Â in. x 3.5Â in.).
UL Listed. Includes a lock and key set.

Steel enclosure, large, grey
CTN D8103
Product No. 4.998.800.201
Grey steel enclosure measuring 41Â cm x 41Â cm x 9Â cm (16Â in. x 16Â in. x 3.5Â in.).

Fire enclosure, 16x16x3.5", red
CTN D8109
Product No. 4.998.800.205
Red steel enclosure measuring 16 in. x 16 in. x 3.5 in. (41 cm x 41 cm x 9 cm). UL Listed. Includes a lock and key set.

Kit with DVD and USB security dongle
CTN D5500C-USB
Product No. 4.998.143.724
Remote Programming Software (RPS) with USB security key (dongle).

Kit B820/EN4200
CTN ENKIT-SDI2
Product No. F.01U.263.632
Kit containing B820 and EN4200 for use on SDI2 bus panels.