PRODUCT FAMILY
DS150i Series Request-to-exit Detectors

DS150i Series Request-to-exit Detectors
Request-to-exit sensor, black
CTN DS151I
Product No. F.01U.364.867
Current Draw: | 26 mA at 12 VDC |
Voltage: | 12 VAC or VDC; 24 VAC or VDC |
Alarm Output: | Two Form C relay contacts |
Indicators: | One activation LED |
Relay Latch Time: | Adjustable to 60 sec |
Enclosure Dimensions: | 3.8 cm x 15.9 cm x 3.8 cm (1.5 in. x 6.25 in. x 1.5 in.) |
Enclosure Material: | High impact ABS plastic enclosure |
Power Loss Default Mode: | Programmable fail-safe or fail-secure modes. |
Timer Mode: | Programmable reset (accumulative) or non-reset (counting) mode. |
Mounting Location: | Surface mount on wall or ceiling |
Operating Temperature: | -29°C to +49°C (-20°F to +120°F) |
Radio Frequency Interference (RFI) Immunity: | No alarm or setup on critical frequencies in the range from 26 MHz to 1000 MHz at 50 V/m. |

Trim plate for DS150 and DS160
CTN TP160
Product No. 4.998.800.318
A light gray trim plate used when mounting the detector over a standard single-gang box.

Trim plate for DS151 and DS161, black
CTN TP161
Product No. 4.998.130.552
A black trim plate used when mounting the sensor over a standard single-gang box.