DS935Z and ZX935Z Series PIR Intrusion Detectors
DS935Z and ZX935Z Series PIR Intrusion Detectors
Motion detector, 35ft (11m)
Commercial Type No. ZX935Z
Product No. 4.998.126.662
| Dimensions: | 10.8 cm x 7 cm x 4.6 cm (4.25 in. x 2.75 in. x 1.8 in.) |
| Material: | High impact ABS plastic enclosure |
| Operating Temperature: | -40°C to +49°C (-40°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F) |
| Radio Frequency Interference (RFI) Immunity: | No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m. |
| Height (recommended): | 2 m to 3 m (6 ft to 10 ft) |
| Location: | Wall or corner |
| Internal and Pattern Pointability: | Coverage is adjustable -18° to +2° vertically. |
| Alarm: | DS935Z: Form reed relay rated at 3.0 W, 125 mA at 28 VDC for resistive loads and protected by a 4.7 Ω resistor in the common C leg. |
| Tamper: | DS935Z: Normally-closed (with cover in place) tamper switch. Maximum current load is 25 mA. |
| Trouble: | DS935Z: Solid state output shorts to auxiliary power negative when activated. Tamper contacts rated at 28 VDC, 125 mA maximum. |
| Current Draw: | DS935Z: 20 mA at 12 VDC |
| Voltage (Input): | DS935Z: 9 VDC to 15 VDC |
Mounting bracket, swivel, low profile
Commercial Type No. B335-3
Product No. 4.998.800.014
Swiveling, low-profile, universal bracket for wall mounting. The vertical swivel range is +10° to -20°, while the horizontal swivel range is ±25°.
Mounting bracket, ceiling, universal
Commercial Type No. B338
Product No. 4.998.800.282
Swiveling universal bracket for ceiling mounting. The vertical swivel range is +7° to -16°, while the horizontal swivel range is ±45°.
Lens, 70ft (21m), 3pcs
Commercial Type No. OMLR93-3
Product No. 4.998.111.865
Provides long-range coverage with a 21 m x 3 m (70 ft x 10 ft) pattern. Shipped in packages of three.