Fixed camera 5MP
Commercial Product No.: NBN-80052-BA | Product No.: F.01U.285.362Power Supply | 12 VDC; Power-over-Ethernet 48 VDC nominal |
Current Consumption | 750 mA (12 VDC); 200 mA (PoE 48 VDC) |
Power Consumption | 9 W |
PoE | IEEE 802.3af (802.3at Type 1) Class 3 |
Type | 1/1.8” CMOS |
Total sensor pixels | 6.1 MP |
5.5MP (4:3) mode | 97 dB WDR (97+16 dB with IAE) |
5MP (16:9) mode | 97 dB WDR (97+16 dB with IAE) |
1080p mode | 103 dB WDR (103+16 dB with IAE) |
Color 5MP mode | 0.0121 lx |
Color 1080p mode | 0.00825 lx |
Mono 5MP mode | 0.004 lx |
Mono 1080p mode | 0.00275 lx |
Video compression | H.264 (MP); M-JPEG |
Streaming | Multiple configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth. Regions of Interest (ROI) |
Overall IP Delay | Min. 120 ms, Max. 340 ms |
GOP structure | IP, IBP, IBBP |
Encoding interval | 1 to 30 [25] fps |
Encoder regions | Up to 8 areas with encoder quality settings per area |
5MP (16:9) | 2992 X 1680 |

Varifocal lens, 4.1-9mm, 5MP, CS mount
CTN LVF-5005C-S4109
Product No. F.01U.297.770
Varifocal SR megapixel IR corrected lens with 1/1.8” sensor and CS-mount

Varifocal lens, 12-50mm, 5MP, C mount
CTN LVF-5005N-S1250
Product No. F.01U.305.567
Varifocal megapixel IR corrected lens with 1/1.8" sensor max and C-mount

Cable, SMB to BNC, camera-cable, 0.3m
CTN NBN-MCSMB-03M
Product No. F.01U.291.564
0.3 m (1 ft) analog cable, SMB (female) to BNC (female) to connect camera to coaxial cable

Cable, SMB to BNC, camera-monitor/DVR
CTN NBN-MCSMB-30M
Product No. F.01U.291.565
3 m (9 ft) analog cable, SMB (female) to BNC (male) to connect camera to monitor or DVR

Power supply, 120VAC 60Hz,12VDC 1A out
CTN UPA-1220-60
Product No. F.01U.076.155
Power supply for camera. 100-240 VAC, 50/60 Hz In; 12 VDC, 1 A Out; regulated.
Input connector: 2-prong, North American standard (non-polarized).

Camera mount, 6", indoor
CTN TC9210U
Product No. F.01U.143.373
A universal 6-inch wall/ceiling grid with off-white finish for 4.5 kg (10 lb) max load, incl. T-Bar ceiling clip and wall/ceiling mount flange.

Outdoor housing, blower, 230VAC/35W
CTN UHO-HBGS-51
Product No. F.01U.302.310
Outdoor housing for (230 VAC / 12 VDC) camera with 230 VAC power supply, blower and feed-through cabling.

Outdoor housing, blower, 120VAC/35W
CTN UHO-HBGS-61
Product No. F.01U.302.311
Outdoor housing for (120 VAC / 12 VDC) camera. 120 VAC power supply; blower; feed-through cabling

Outdoor housing, 24VAC, feed-through
CTN UHO-HBGS-11
Product No. F.01U.302.304
Outdoor housing for (24 VAC / 12 VDC) camera with 24 VAC power supply, blower and feed-through cabling.

Outdoor housing, POE + power supply
CTN UHO-POE-10
Product No. F.01U.300.502
Outdoor camera housing with PoE+ power supply.

Wall mount with cable feed through, 12"
CTN LTC 9215/00
Product No. 4.998.137.651
Wall mount for camera housing, cable feed-through, 30 cm (12 in.)

Wall mount for UHI/UHO
CTN LTC 9215/00S
Product No. F.01U.503.621
Wall mount for camera housing, cable feed-through, 18 cm (7 in.)
Feed through J mount
CTN LTC 9219/01
Product No. F.01U.503.623
J-mount for camera housing, 40 cm (15 in).

Column mount, 8", 9KG/20lb load
CTN LTC 9210/01
Product No. F.01U.027.057
Feed-through column mount for 20 cm (8 in.), 9 kg (20 lb) maximum load. Light gray finish.

Pole mount adapter for LTC9210,9212,9215
CTN LTC 9213/01
Product No. F.01U.009.291
Flexible pole mount adapter for camera mounts (use together with the appropriate wall mount bracket). Max. 9 kg (20 lb); 3 to 15 inch diameter pole; stainless steel straps

Midspan, 15W, single port, AC in
CTN NPD-5001-POE
Product No. F.01U.305.288
Power-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4 W, 1-portWeight: 200 g (0.44 lb)

Midspan, 4 port x 15W, AC in
CTN NPD-5004-POE
Product No. F.01U.305.289
Power-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4 W, 4-portsWeight: 620 g (1.4 lb)

Varifocal lens, 4-13mm, 12MP, CS mount
CTN LVF-8008C-P0413
Product No. F.01U.319.331
Varifocal megapixel lens; P-iris; CS-mount; 1/1.8” ; F1.5; 4-13mm
Parts included with this product
Quantity | Component |
---|---|
1 | DINION IP 8000 camera |
1 | Quick install instructions |
1 | Power connector |
1 | Data/Alarm connector |
1 | Identification labels |
1 | C/CS mount adapter ring for mounting a lens with a C-mount (not supplied for factory fitted lenses) |