Power amplifier, 2x500W
Commercial Product No.: PVA-2P500 | Product No.: F.01U.298.641100 V | 20 Ω (500 W) |
70 V | 10 Ω (500 W) |
Rated output power, 1 kHz, THD ≤ 1% | 2 x 500 W1 |
Rated input voltage | +6 dBu |
100 V | 110 V |
70 V | 78 V |
70 V | 33.2 dB |
100 V | 36.2 dB |
Maximum load capacitance | 2 µF |
Input level, max. | +18 dBu (9.75 Vrms) |
Frequency response, ref. 1 kHz, rated load, -3 dB | 50 Hz to 25 kHz |
Input impedance, active balanced | 20 kΩ |
Signal-to-noise ratio (A-weighted) | > 104 dB |
Output noise (A-weighted) | < -62 dBu |
Crosstalk , ref. 1 kHz | < -85 dB |
Output stage topology | Class-D, transformer, floating |
Power supply | Mains: 115-240 VAC ±10%, 50/60 Hz2 Battery: 21-32 VDC |
Power consumption | Pmax - 3dB * / idle **/ Standby 230VAC, 50Hz: 700W / 21W / 1.9W120VAC, 60Hz: 745W / 18W / 1.5W24VDC, 60Hz: 735W / 16W / 1.5W * Alarm, ** No audio (pilot tone) |
Inrush current | 2 A |
Inrush current, after five-second power cycle | 1.3 A |

12mths wrty ext. power amplifier
CTN EWE-PRSPAM-IW
Product No. F.01U.360.710
12 months warranty extension
Parts included with this product
Quantity | Component |
---|---|
1 | PVA-2P500 Power Amplifier |
1 | Power cord 230 V AC |
1 | Power cord 120 V AC |
1 | Set of connectors |
1 | Set of feet |
1 | Installation manual |
1 | Important safety instructions |