Smoke detector, long-range beam 24V
Commercial Product No.: D296 | Product No.: 4.998.125.869Current (alarm): | Receiver: 60 mA, Transmitter: 20 mA |
Current (standby): | Receiver: 45 mA, Transmitter: 20 mA |
Voltage (operating): | 18 VDC to 32 VDC |
Current (alarm): | 20 mA at 24 VDC |
Current (standby): | 10 mA at 24 VDC |
Voltage (operating): | 10 VDC to 32 VDC |
Relative Humidity: | 0% to 95%, non-condensing |
Temperature (ambient): | -22°F to +130°F (-30°C to +54°C) For UL Listed installations, +32°F to +130°F (0°C to +54°C) |
Dimensions (H x W x D): | 7 in. x 5.5 in. x 5.5 in. (17.8 cm x 14 cm x 14 cm) |
Transmission Range: | 30 ft (9 m) to 350 ft (107 m) |

Field test kit for D296/D297
CTN D308
Product No. 4.998.137.953
Allows testing the calibration of the D296 and D297 beam smoke detectors

Remote indicator plate
CTN D344-RL
Product No. 4.998.140.354
Used with the D340 Series Duct Smoke Detector Housings

Remote test/indicator plate, 24V
CTN D344-RT
Product No. F.01U.024.868
Use with a D340/D341/D342 or D343 (legacy product) Duct smoke housing or D296/D297 Long‑range beam smoke detector.

Test cable 3ft
CTN D1005
Product No. 4.998.125.817
Connects a digital voltmeter to the detector's calibration pin for verifying that the detector is within its calibration range
Parts included with this product
Quant. | Component |
---|---|
1 | D296 Transmitter |
1 | D296 Receiver |
1 | D344-RL Remote indicator plate |
1 | D308 Field test kit |
1 | D1005 Test cable |
1 | Hardware pack |
1 | Literature pack |