An error occurred
MAP5000 kit, small com EMEA
CTN: ICP-MAP5000-SCE | Product No.: F.01U.334.155
Discontinued
Key Specifications
Minimum operating voltage in VDC | 19 |
Maximum operating voltage in VDC | 29 |
Rated voltage in VDC | 28 |
Minimum current consumption in mA | 250 |
Maximum current consumption in mA | 500 |
Maximum line resistance in Ω | 100 |
Maximum current consumption in mA per output | 1000 |
Maximum operating voltage in VDC | 30 |
Maximum operating voltage in VAC | 30 |
Back‑up time | Determined by battery capacity and system load. Consider time or capacity limits for recharging the batteries regarding local regulations or EN standards if needed. |
Dimension in cm (H x W x D) | 14.6 x 21.6 x 5.5 |
Weight in g | 450 |
Indicators | Green LED for operating status |
Auxiliary output | 1 |
Power output | 2 |
Form C dry-contact relay output | 2 |
LSN Gateways | 1 |
Control Centers | 2 |
Integrated IP Communicator | 1 |
Minimum operating voltage in VDC | 16 |
Parts included with this product
Quantity | Component |
---|---|
1 | MAP panel 5000 small COM including: Eight 12.1 kΩ EOL resistors Two 120 Ω CAN terminal EOL resistors One panel power cable One 2-pin terminal plug (white) One 2-pin terminal plug (dark blue) Two 3-pin terminal plugs (orange) Four 3-pin terminal plugs (dark blue) One 4-pin terminal plug (green) Snap ferrite small Snap ferrite big |
1 | MAP Control Center (touch screen keypad) including: Two screws M3 x 20 mm Torx |
1 | MAP LSN Gateway Module including: CAN cable, short Four terminal plugs (two brown, two white) |
1 | MAP Power Supply 150W including: Two Bosch Data Bus (BDB) cables, long (with 4‑pin terminal plug) One thermistor cable (with 2‑pin terminal plug) One battery cable (with ring terminal) One battery jumper cable (with ring terminal) Two 2‑pin terminal plugs (dark blue) One 2‑pin terminal plug (white) One 3‑pin terminal plug (orange) One 4‑pin terminal plug (green) One 5‑pin terminal plug (black) |
1 | MAP Panel Enclosure Kit including: One MAP Panel Enclosure Tamper Switch One MAP AC Terminal Block One MAP Enclosure Lockset Seven TORX screws (M4 x 8 mm, type A) Two TORX screws (M3 x 5 mm) Spiral wrap (large) Drill template Installation Manual |