Fire power supply/charger, 4A
Commercial Type No.: AL400UL-PD4R | Product No.: F.01U.026.209
- Four fuse-protected, Class 2 Rated, power‑limited outputs
- 12 VDC or 24 VDC selectable output
- Outputs are filtered and electronically regulated
- Main power input fuse rated at 3.5 A, 250 V
- Short circuit and thermal overload protection
- Built‑in charger for sealed lead‑acid or gel‑type batteries
Initiating circuit module, dual class A
Commercial Type No.: D129 | Product No.: 4.998.125.827
- Adjustable alarm and reset delays
- Provides two supervised Class A (Style D) loops
- Reliable terminal connections
- Suitable for waterflow switches
- Compensates for sprinkler alarm valve fanning
- Suitable for mechanical initiating devices
Inovonics SDI2 bus interface
Commercial Type No.: B820 | Product No.: F.01U.383.287
- Provides connectivity to Inovonics EchoStream EN4200 Serial Receiver
- May be installed up to 1000 ft from the control panel, allowing for optimal wireless reception
- Capacity to store any combination of point and keyfob ID’s for a total of 350 wireless devices (combined types) and up to 8 repeater ID’s
- Mounts directly inside the EN4200 Receiver housing, no separate enclosure required
- UL and CSFM Listed
DS7000
Input module, dual-zone
Commercial Type No.: DS7460I | Product No.: 4.998.113.231
- Supervises two protection loops
- Can be used in UL Listed fire and security applications
- DIP switch programmable
DS7000
Input module, single-zone
Commercial Type No.: DS7461I | Product No.: 4.998.113.232
- Supervises one power-limited protection loop
- Can be used in UL Listed fire and security applications
- DIP switch programmable
PRODUCT FAMILY
IPP‑AL400‑ULPS Power Supplies (4.0 A)
- Filtered and electronically regulated outputs
- Short circuit and thermal overload protection
- Built‑in charger
- Automatically switches to standby battery when AC fails
- Three supervision outputs
- LED indicators for AC and DC output
- Mounting pattern to support up to two B426 Modules, or two D9210C Modules, or a combination
- Mounting pattern to support up to two C900V2 Modules and one IPP‑PD4‑ULCB Module
Keypad surface mount box
Commercial Type No.: B56 | Product No.: F.01U.295.834
- Protects keypad wiring for installations using conduit
- Includes an integrated bubble level for easy installation
- Front cover mounting of keypad for easy installation of the keypad
G Series
Large Universal Enclosure, White
Commercial Type No.: B18 | Product No.: F.01U.363.634
- Easy-to-install on a number of different surface materials with a removable cover for ease of installation
- Enough space to protect control panel and up to 2 D1218 batteries
- Attack-resistant cold-rolled steel provides for ultimate protection against theft and property damage
- Includes cover and wall tamper
- Built in module mounting locations
Lock with 2 keys, short body
Commercial Type No.: D101F | Product No.: 4.998.155.082
- Die cast body
- Zinc –plated steel cam
- Comes with 2 keys (D102F)
Logic board for AL802/AL1002
Commercial Type No.: AL800LGK9E | Product No.: 4.998.132.999
- Class 2 rated power‑limited outputs
- Two (2) Class A or two (2) Class B FACP inputs
- Two (2) NC dry contact trigger inputs
- Two (2) Class A or four (4) Class B notification circuits of which two (2) Class B outputs may be paralleled for more power on a notification circuit
- One (1) auxiliary power output at 1 A supply current with battery back up
Low battery disconnect module
Commercial Type No.: D135A | Product No.: 4.998.125.829
- Disconnects a B6512/B5512/B4512/B3512 from the battery when the battery level drops to 9.5 VDC
- Required for use with compatible control panels for CAN/ULC S559
- Quick and easy installation
Modular telephone cord, 2ft (0.6m)
Commercial Type No.: D162 | Product No.: F.01U.020.524
- Connects an RJ31X Telco block to an RJ38X Telco jack
- 61 cm (2 ft.) for shorter distances
G Series
Module Enclosure Small, White
Commercial Type No.: B03 | Product No.: F.01U.363.635
- Compatible with Bosch 3-hole mounting modules
- Includes enclosure tamper switch
Mounting bracket, 90°
Commercial Type No.: D138 | Product No.: 4.998.125.831
- Bosch 3-hole mounting pattern for attaching accessories
- Mount accessory modules in various enclosures with two screws
- Grommet edge provided to protect wires from metal edge
Mounting plate for D8103/D8108A/D8109
Commercial Type No.: D2402 | Product No.: F.01U.246.602
Notification appliance module
Commercial Type No.: D192G | Product No.: 4.998.133.000
- Supervises 12 VDC or 24 VDC notification appliance circuits (NACs)
- Supervised signal silencing switch
- Notification appliance circuit rated at 3.0 A
- Multiple module configurations
- Mounts in panel enclosure
Polarity reversing module, 2-/4-wire 24V
Commercial Type No.: D132B | Product No.: 4.998.140.232
- Works with both 2‑wire and 4‑wire 24 V circuits
- Can be used with Class A or Class B initiating circuits
- Can be mounted in the control panel enclosure
Power extender, NAC 12/24V, red
Commercial Type No.: AL802-WAL | Product No.: F.01U.020.477
- Two (2) Class A or four (4) Class B outputs
- Input to Output Follower mode maintains synchronization of NAC devices
- AC Fail, Low Battery, and Battery Presence supervision
- LEDs indicate prior fault on one or more signaling circuit outputs
- One auxiliary power output (1 A supply current) with battery backup
Power extender, NAC 10A 12/24V
Commercial Type No.: AL1002WAL | Product No.: F.01U.008.210
- Two (2) Class A or four (4) Class B outputs
- Input to Output Follower mode maintains synchronization of NAC devices
- AC Fail, Low Battery, and Battery Presence supervision
- LEDs indicate prior fault on one or more signaling circuit outputs
- One auxiliary power output (1 A supply current) with battery backup
Power supply board for AL600ULX
Commercial Type No.: AL600ULB | Product No.: 4.998.132.998
- Single-output power supply
- 12 VDC or 24 VDC selectable output with 6 A continuous supply current
- Filtered and electronically‑regulated output
- Short‑circuit and thermal‑overload protection
- Built-in charger for sealed lead-acid or gel type batteries
Power supply with cord, 2.5A 12/24V
Commercial Type No.: AL300ULXR | Product No.: F.01U.001.686
- Single-output power supply
- Regulated 12 VDC or 24 VDC selectable output
- Filtered and electronically‑regulated output
- Short‑circuit and thermal‑overload protection
- Built-in charger for sealed lead-acid or gel type batteries
Powered loop interface
Commercial Type No.: D125B | Product No.: 4.998.800.203
- Two separate powered detector loops
- Suitable for 12 VDC or 24 VDC, two‑wire or four‑wire detectors
- Up to 50 two‑wire 12 VDC glass break detectors
- Reports individual loop alarm, individual loop trouble, and ground fault
- Manually resets latching devices from control panel or remote central station
Relay module, form C, 10A 12/24V
Commercial Type No.: PAM-4 | Product No.: F.01U.135.043
- One single pole, double throw (SPDT) dry contact Form C relay
- Wide voltage range from 9 VDC to 40 VDC
- Input voltages polarity‑sensitive and diode‑protected
- Current constant across the operating range
Replacement key for D101F lock
Commercial Type No.: D102F | Product No.: F.01U.020.512
- Rustproof nickel-plated brass
- Convenient size to carry and use
- Works on enclosure locks stamped 203
Resistors, 8 end-of-line, 1 kOhm 0.5W
Commercial Type No.: P105F | Product No.: 4.998.140.608
- End‑of‑line resistors for loop supervision
Resistors, 8 end-of-line, 33 kOhm 0.5W
Commercial Type No.: P106F | Product No.: 4.998.143.557
Reversing relay module, 12V
Commercial Type No.: D132A | Product No.: 4.998.800.175
- Allows compatible control panels to sound all smoke detectors within a loop during an alarm
- Mounts easily on any of the three-hole module mounting locations in a compatible control panel enclosure
SDI isolated bus splitter
Commercial Type No.: ICP-SDI-9114 | Product No.: F.01U.029.860
- Provides two independent, isolated SDI buses from a single SDI connection to the control panel
- Can be used to meet the requirements for a UL864 compliant combination control panel
- Does not affect the operation of the control panel or the associated SDI devices
- Additional power can be supplied by an external power supply
DS7000
Single input/output module
Commercial Type No.: DS7465I | Product No.: 4.998.113.233
- Supervises one power-limited input zone
- Provides one output relay
- Can be used in UL Listed fire and security applications
- DIP switch programmable
Single relay module for 2A at 30VDC
Commercial Type No.: D133 | Product No.: 4.998.800.176
- Provides one Form C dry contact rated for 2 A at 30 VDC
Supervision module, battery lead
Commercial Type No.: D113 | Product No.: 4.998.125.818
- Works with 12 V nominal systems
- Meets NFPA 72 requirements for battery lead supervision for fire alarm control panels (FACPs)
Tamper switch for enclosure, 2pcs
Commercial Type No.: D110 | Product No.: F.01U.246.707
- Tamper switch fits all enclosures
Telephone cord, 7ft (2m)
Commercial Type No.: D160 | Product No.: F.01U.020.522
- Connects a control panel to an RJ31X Telco block
Telephone cord, dual modular, 7ft (2m)
Commercial Type No.: D161 | Product No.: 4.998.143.634
- Connects an RJ31X Telco block to an RJ38X Telco jack
- 2.1 m (7 ft.) for longer distances
Transformer enclosure kit, grey
Commercial Type No.: D8004 | Product No.: 4.998.140.404
- Separates high and low voltage within the enclosure
- Comes with a duplex grounded receptacle
- Easy wiring and mounting
Transformer plug-in, 18V 50VA
Commercial Type No.: TR1850 | Product No.: 4.998.126.576
- Provides efficient, constant power for compatible products
Transformer, plug-in, 110/16V 25VA
Commercial Type No.: D1625 | Product No.: 4.998.151.538
Transformer, plug-in, 18V 22VA
Commercial Type No.: CX4010 | Product No.: F.01U.020.504
- Provides efficient, constant power for compatible control panels and modules
Transformer, plug-in, 18V 22VA, Canada
Commercial Type No.: ICP-TR1822-CAN | Product No.: F.01U.005.574
- Provides efficient, constant power for compatible modules
Trim plate for keypad
Commercial Type No.: B96 | Product No.: F.01U.272.856
- Cover the wall footprint of previous keypads when replacing them with slimmer keypads