Bosch Security and Safety Systems | Latin America
Product Variants
Product Families
More Content
EVAX
Amplifier with microphone, 100W, grey
CTN: EVX-100E | Product No.: 4.998.143.761
- 100 W amplifier with tone generator
- Used as slave to EVX-100 that supplies source audio
- Can operate as stand‑alone voice evacuation system with only tone and microphone amplification where an automatic message is not wanted
250 in stock
EVAX
Amplifier with microphone, 25W, grey
CTN: EVX-25E | Product No.: 4.998.143.753
- 25 W amplifier with tone generator
- Used as slave to EVX-100 that supplies source audio
- Can operate as stand‑alone voice evacuation system with only tone and microphone amplification where an automatic message is not wanted
250 in stock
EVAX
Amplifier with microphone, 50W, grey
CTN: EVX-50E | Product No.: 4.998.143.758
- 50 W amplifier with tone generator
- Used as slave to EVX-100 that supplies source audio
- Can operate as stand‑alone voice evacuation system with only tone and microphone amplification where an automatic message is not wanted
250 in stock
Audio system control
CTN: MB-ASC | Product No.: F.01U.201.689
- Two RS232 communication ports
- Provides digitally-stored message control
250 in stock
Audio/module interface
CTN: MB-AMI | Product No.: F.01U.201.678
- Included with basic panel
- Additional cards enable control of multiple modules
- Easy installation
250 in stock
PRODUCT FAMILY
Bosch EVAX Systems - High-rise applications
- Master panel with capability for multiple distributed panels
- Operates as stand‑alone or connected to an FACP
- Network transmission over fiber optic or copper pair cable
- Digitized live voice and prerecorded messaging
- Zone paging control
- Fan and damper control
- Meets area of refuge/rescue assistance communication requirements
- Variety of accessories available for system customization
250 in stock
Ceiling speaker/strobe 15-110cd 24V
CTN: G-SSPK24CLPW | Product No.: F.01U.082.918
- High quality dB output
- Frequency range of 400 Hz to 4000 Hz
- Screw terminals; separate In and Out wiring 18 AWG to 12 AWG (ISO 0.75 mm2 and 4 mm2)
- Field‑selectable power taps: 1/8 W, 1/4 W, 1/2 W, 1 W, 2 W, 4 W
- Speaker voltage 25 VRMS or 70.7 VRMS standard; field‑selectable
- Tamperproof grill
- Flush‑mounts to a standard 4‑inch square by 2.125‑in. deep back box
250 in stock
Data communications/control
CTN: MB-DCC | Product No.: F.01U.201.688
- Replacement board for pre-installed board in Master panel
- Pre-programmed when delivered
- Provides digitally-stored message control
250 in stock
PRODUCT FAMILY
E50 Series Multi‑candela Speaker Strobes
- 25 VRMS or 70 VRMS operation up to 2 W
- Compatible with SM and DSM Synchronization Modules
- Easy wiring with screw terminals
- Mounts on standard electrical boxes
- Snap‑on cover hides mounting screws for an attractive appearance
250 in stock
PRODUCT FAMILY
E70 High‑candela, Wall‑mount, Low‑profile Speaker Strobes
- 24 VDC, filtered or unfiltered
- Field‑selectable candela settings (135 cd or 185 cd)
- ADA, NFPA, ANSI compliant
- Compatible with SM and DSM Synchronization Modules
- Low average current draw and zero inrush current
- Easy wiring with screw terminals
- Low‑profile design
250 in stock
PRODUCT FAMILY
E70 Low‑profile Speakers
- 24 VDC, filtered or unfiltered
- 25 VRMS or 70 VRMS operation at a choice of five taps from 0.125 W to 2 W
- Cost‑effective two‑wire design
- Easy wiring with screw terminals
- Supervised inputs
- Low average current draw
- UL Listed for indoor use
- Meets or exceeds NFPA and ANSI standards
250 in stock
PRODUCT FAMILY
E70 Multi‑candela, Wall‑mount, Low‑profile Speaker Strobes
- 24 VDC, filtered or unfiltered
- Field‑selectable candela settings (15 cd, 30 cd, 75 cd or 110 cd)
- ADA, NFPA, ANSI compliant
- Compatible with SM and DSM Synchronization Modules
- Low average current draw
- Zero inrush current
- Easy wiring with screw terminals
- Low‑profile design
250 in stock
PRODUCT FAMILY
E70 Speaker Strobes with Colored Lenses
- Choice of two strobe lens colors with range of intensity options
- Field‑selectable voltages of 25 VRMS or 70 VRMS and powers from 1/8 W to 2 W
- Wall or ceiling mount on standard electrical boxes
- Operates from 16 V to 33 V at 1 flash/sec using filtered or full‑wave rectified DC voltage
- Synchronize with SM or DSM Synchronization Modules
250 in stock
PRODUCT FAMILY
E90 Multi‑candela, Ceiling‑mount, Low‑profile Speaker Strobes
- 24 VDC, filtered or unfiltered
- Field‑selectable candela settings (15 cd, 30 cd, 75 cd or 95 cd)
- ADA, NFPA, ANSI compliant
- Compatible with SM and DSM Synchronization Modules
- Low average current draw with zero inrush current
- Easy wiring with screw terminals
- Low‑profile design
250 in stock
PRODUCT FAMILY
E90 Speaker-Strobes with Colored Lenses
- Choice of two strobe lens colors with range of intensity options
- Field‑selectable voltages of 25 VRMS or 70 VRMS and powers from 1/8 W to 2 W
- Ceiling mount on standard electrical boxes
- Operates from 16 V to 33 V at 1 flash/sec using filtered or full-wave rectified DC voltage
- Synchronize with SM or DSM Synchronization Modules
250 in stock
PRODUCT FAMILY
ET70WP Weatherproof Speaker Strobes
- Wall‑mount and ceiling‑mount models
- Weatherproof from ‑31°F to +150°F (‑35°C to +66°C)
- 25 VRMS or 70 VRMS operation at a choice of seven taps from 0.125 W to 8 W
- Cost‑effective two‑wire design with easy-to-wire screw terminals
- Meets or exceeds NFPA and ANSI standards
- Supervised inputs
- Low average current draw
- Compatible with SM and DSM Synchronization Modules
- UL Listed for outdoor use when used with IOB backbox
250 in stock
PRODUCT FAMILY
ET80 Multi‑candela, Wall‑mount, Vandal‑resistant Speaker Strobes
- 25 VRMS or 70 VRMS operation up to 8 W
- Low average current draw
- Extra protection and improved audibility through sealed‑back speaker construction and vandal‑resistant grill
- Compatible with SM and DSM Synchronization Modules
- Easy wiring with screw terminals
- Complies with RFI limits of FCC Part15, Class B for compatibility with sensitive detection and communication circuits
- Meets or exceeds NFPA and ANSI standards
250 in stock
PRODUCT FAMILY
ET90 Multi‑candela, Ceiling‑mount, High‑performance Speaker Strobes
- 24 VDC, filtered or unfiltered
- Field‑selectable candela settings (15 cd, 30 cd, 75 cd or 95 cd)
- ADA, NFPA, ANSI compliant
- Compatible with SM and DSM Synchronization Modules
- Low average current draw with zero inrush current
- Easy wiring with screw terminals
- Low profile design
250 in stock
Extended input interface, 16-input
CTN: MB-XI | Product No.: F.01U.201.672
- Using ribbon cable, up to 7 cards connect to the MB-II card to increase inputs
- Each card provides 16 inputs to the Main board through the MB-II card
- Address using hexadecimal address dial
250 in stock
Fire phone handset
CTN: MB-FH | Product No.: F.01U.201.684
- Allows 2-way communication between fire personnel
- Easy to carry
- Standard handset, cord, and ¼-inch jack
250 in stock
Fire phone handset cabinet
CTN: MB-TC | Product No.: F.01U.201.685
- Conveniently and securely holds up to 6 MB-FH handsets
- Surface or semi-flush mount
- Available in charcoal gray or red
250 in stock
Fire phone interface
CTN: MB-FPI | Product No.: F.01U.201.679
- Provides four supervised Class B fire phone circuits in a distributed panel
- Each panel supports up to four MB-FPI cards for a total of 16 circuits
- An MB-FPO2 card is required for 2nd, 3rd, and 4th MB-FPI cards
250 in stock
Fire phone jack, single gang plate
CTN: MB-FJ | Product No.: F.01U.201.683
- When located in strategic places within a building, allows fire phone plug-in for 2-way communication with master location
- Simple to install wall plate with ¼-inch jack receptacle
- Mounts to single-gang electrical box
250 in stock
Fire phone output
CTN: MB-FPO2 | Product No.: F.01U.201.680
- Cards allow a total of 16 fire phone circuits per Distributed panel
- Connects to MB-FPI with 10-point polarized ribbon cable
- Mount to snap track or insulating nylon standoffs
250 in stock
Fire phone station, surface-mount
CTN: MB-FS | Product No.: F.01U.201.686
- Simply lifting the handset signals the operator at the Master panel
- Switch on Master panel opens the line for 2-way communication
- Replacing handset on hook or Operator disconnecting switch terminates call
- Surface of semi‑flush mounting
250 in stock
PRODUCT FAMILY
G‑SSPK24WLP Wall‑mount Speaker Strobes
- High quality dB output
- Frequency range of 400 Hz to 4000 Hz
- Screw terminals; separate In and Out wiring 18 AWG to 12 AWG (ISO 0.75 mm2 to 4 mm2)
- Field‑selectable power taps: 1/8 W, 1/4 W, 1/2 W, 1 W, 2 W, 4 W
- Speaker voltage 25 VRMS or 70.7 VRMS standard; field‑selectable
- Tamperproof grill
- Flush‑mounts to a standard 4‑inch square by 2.125 in. deep back box
250 in stock
PRODUCT FAMILY
G‑SSPKCLP Low‑profile Speakers
- High quality dB output
- Frequency range of 400 Hz to 4000 Hz
- Screw terminals; separate In and Out wiring 18 AWG to 12 AWG (ISO 0.75 mm2 to 4 mm2)
- Field‑selectable power taps: 1/8 W, 1/4 W, 1/2 W, 1 W, 2 W, 4 W
- Speaker voltage 25 VRMS or 70.7 VRMS standard; field‑selectable
- Tamperproof grill
- Flush‑mounts to a standard 4‑inch square by 2.125 in. deep back box
250 in stock
Master fire phone assembly (MP's)
CTN: MB-MFA | Product No.: F.01U.201.671
- Replaces existing fire phone assembly
- Easy to install
250 in stock
Master microphone control
CTN: MB-MMC | Product No.: F.01U.201.690
- Factory-installed in Master panel
- Microphone with pre-amp and gain control
- Two-character alphanumeric display for system activity and supervision code reporting
- LEDs for System Power, System Fault, and System In Alarm
- Switch/LEDs for System Reset, All Call, and Trouble Silence
250 in stock
Mother board relay, class A/class B
CTN: MB-MBK | Product No.: F.01U.201.677
- Standard component for high-rise distributed panels
- Factory or field installation available
- Allow terminal connections to be made on the motherboard
250 in stock
Mother board/remote
CTN: MB-MBR | Product No.: F.01U.201.691
- Provides card slot(s) for MB-AMI cards to control additional amplifiers for distributed systems
- Provides card slots for MB-FPI cards for up to 16 supervised Class B fire phone circuits
- Provides card slots for up to two MB-MBK cards to provide eight Class B or four Class A speaker circuits per distributed panel
250 in stock
Power supply
CTN: MB-PWR | Product No.: F.01U.201.692
- Easy connection to a supervised 120 VAC, 60 Hz input transformer
- 24 VDC power and fault indication connection LEDs
- Mounts on SnapTrack or standoffs
250 in stock
EVAX
Power transformer for EVX-25E
CTN: EVX-T2885 | Product No.: 4.998.143.738
- Transformer for EVX-25E expansion module
- Rated at 28 VAC, 100 VA
250 in stock
EVAX
Power transformer for EVX-50E/100E
CTN: EVX-T17528 | Product No.: 4.998.143.739
- Transformer for EVX-50E or EVX-100E expansion module
- Rated at 28 VAC, 180 VA
250 in stock
Switch scan card
CTN: MB-SSC | Product No.: F.01U.201.670
- Controls up to eight MB-SLC Switch/LED Cards for a total of 128 switches
- Up to 16 MB‑SSC cards can be used for a system capacity of 2048 switches
- Connects to MB-SLC card by ribbon cable for easy wiring
250 in stock
Switch/LED card (adds 16 switches)
CTN: MB-SLC | Product No.: F.01U.201.669
- Provides 16 switch/LED points
- Connects to the MB-SSC Switch scan card
- Up to eight can be connected to the MB-SSC for a total of 128 switch points
250 in stock
Warden station, armored-cable
CTN: MB-WS | Product No.: F.01U.201.687
- Simply lifting the handset signals the operator at the Master panel
- Switch on Master panel opens the line for 2-way communication
- Replacing handset on hook or Operator disconnecting switch terminates call
- Armored cable
- Surface of semi‑flush mounting
250 in stock
Showing of 39 Items
Added to Your Shopping Cart