Skip to content Skip to navigation

Bosch Security and Safety Systems | Latin America

PRODUCT FAMILY

FPD-7024 Fire alarm control panels

FPD-7024 Fire alarm control panels

Fire panel, 4-zone 24V, red enclosure

CTN FPD-7024
Product No. F.01U.008.460

FPD-7024 Fire alarm control panels

Fire panel, 4-zone, 24V, no enclosure

CTN FPD-7024-LC
Product No. F.01U.029.948

FPD-7024 Fire alarm control panels

Fire panel, no transformer, 4-zone, 24V

CTN FPD-7024-LT
Product No. F.01U.029.947

FPD-7024 Fire alarm control panels

Fire panel, 4-zone, 24V, Anatel, red

CTN FPD-7024-A
Product No. F.01U.268.902

Battery box/enclosure, 22x21x7.25"

CTN BATB-40
Product No. 4.998.137.930

22 x 20.75 x 7.25" (56 x 53 x 18.5 cm). Holds two dry or wet cell batteries. Optional BATB-SHELF battery shelf increases number of batteries. Suitable for residential/commercial fire or burglary applications.

Battery box/enclosure, 22x21x7.25"

CTN BATB-80
Product No. 4.998.137.931

14 x 20.75 x 7.25" (36 x 53 x 18.5 cm). Battery box/enclosure with shelf holds up to four dry or wet cell batteries. Suitable for residential/commercial fire or burglary applications.

Ethernet Communication Module

CTN B426
Product No. F.01U.324.383

Supports two-way communications over Ethernet networks for compatible control panels

Plug-in Communicator Interface

CTN B450
Product No. F.01U.323.797

Supports two-way IP communications using plug-in cellular communicators for compatible control panels

Replacement key for D101 lock set

CTN D102
Product No. F.01U.020.510

The D102 is a replacement key for locks stamped with 1358.

Battery, 12V 7Ah

CTN D126
Product No. 4.998.125.825

A rechargeable sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions.

Polarity reversing module, 2-/4-wire 24V

CTN D132B
Product No. 4.998.140.232

Reverses polarity on 24 V smoke detector loop during alarm

Battery, 12V 18Ah

CTN D1218
Product No. 4.998.125.820

The D1218 is a 12 V 18 Ah sealed lead‑acid battery with two bolt-fastened terminals. It is used for standby and auxiliary power. It connects to a compatible control panel using a D122 or D122L Dual battery harness.

Annunciator, 8 alarm LED

CTN D7030X
Product No. 4.998.800.536

Eight zone LEDs indicate alarm conditions.

Annunciator, 8 LED (2 supervisory)

CTN D7030X-S2
Product No. 4.998.140.386

Two LEDs indicate supervisory conditions, six indicate alarm conditions.

Annunciator, 8 LED (8 supervisory)

CTN D7030X-S8
Product No. 4.998.140.387

All eight zone LEDs (yellow) indicate supervisory conditions.

Annunciator expander, 8 LED

CTN D7032
Product No. 4.998.140.388

Use with D7030X Family LED annunciators

Multiplex octal relay module

CTN D7035
Product No. 4.998.800.539

Provide eight Form C relay outputs (w/o enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Multiplex octal relay module + enclosure

CTN D7035B
Product No. 4.998.800.540

Provide eight Form C relay outputs (with enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Remote module, 8-input class B

CTN D7042
Product No. 4.998.800.552

Board and plastic enclosure with spring tamper

Multiplex module, metal, 8-input

CTN D7042B
Product No. 4.998.140.390

Board on mounting plate with metal enclosure

Multiplex single-input module, 12V

CTN D7044
Product No. 4.998.800.545

The module connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400 FACP. The module draws supervised input power from the FACP for use in a Class B configuration. Rotary switches allow convenient address setting.

Multiplex mini single-input module, 12V

CTN D7044M
Product No. 4.998.800.546

Connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACPs.

Octal driver module, 12V

CTN D7048
Product No. 4.998.800.541

Provides eight open-collector transistor outputs (current sinks) to FPA‑1000, FPD-7024, or D7024 FACPs through the control panel's option bus.

Multiplex smoke head

CTN D7050
Product No. 4.998.140.391

The symmetry of the D7050’s optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Within the chamber, large smoke particles scatter infrared light which is detected by a gated, high-speed, photodiode sensor.

Multiplex detector head, fixed heat

CTN D7050TH
Product No. 4.998.140.394

The D7050TH has an optical smoke chamber and a 35°F (57°C) fixed-temperature sensor. Use it in confined areas where a fire increases air temperature slowly but substantially before the fire breaks confinement.

Multiplex base, 2-wire

CTN D7050-B6
Product No. 4.998.140.392

Required base for the D7050 and D7050TH MUX smoke heads

Multiplex dual-input module, 12V

CTN D7052
Product No. 4.998.800.549

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP

Multiplex input/output module, 12V

CTN D7053
Product No. 4.998.800.550

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP in configures as either Class A or Class B configuration

USB/serial interface module

CTN DX4010V2
Product No. F.01U.080.969

Provides a local connection between compatible control panels and approved applications.

MUX BUS ISOLATOR MODULE

CTN FLM-7024-ISO
Product No. F.01U.320.177

This module connects to the FPE-7039 MUX expansion module on the FPD-7024 FACP without using a MUX bus address. It isolates a shorted section on the SLC from the rest of the system to minimize communication loss.

Multiplex manual station, single, red

CTN FMM-7045
Product No. F.01U.001.461

The single‑action manual station is UL listed and meets Americans with Disabilities Act (ADA) requirements. An address on the polling circuit is easily set with rotary switches. The pull-down handle locks in the activated position. It is reset by opening the unit with a key and then relocking it.

Multiplex manual station, double, red

CTN FMM-7045-D
Product No. F.01U.002.650

The double‑action manual station is UL listed and meets Americans with Disabilities Act (ADA) requirements. An address on the polling circuit is easily set with rotary switches. The pull-down handle locks in the activated position. It is reset by opening the unit with a key and then relocking it.

LCD annunciator and control keypad

CTN FMR-7033
Product No. F.01U.009.157

Combines remote annunciator and controller functions for fire alarm systems controlled by an FPD‑7024 Fire Alarm Control Panel

LCD annunciator keypad

CTN FMR-7036
Product No. F.01U.009.156

Four‑wire LCD annunciator keypad used with the FPD‑7024 Fire Alarm Control Panel to establish the location of a fire alarm

IDC expander, 4-point

CTN FPC-7034
Product No. F.01U.003.861

The FPC‑7034 adds four Class B (Style B) or two Class A (Style D) initiating circuits to the FPD‑7024 FACP. This plug‑in module is automatically recognized by the control panel's firmware when power is restored to the system.

Multiplex expansion module for FPD-7024

CTN FPE-7039
Product No. F.01U.299.029

It enhances the features of the FACPs. It increases the number of addressable points to 247. It increases the number of relay outputs to 58 on the D7024/DS9400 or 59 on the FPD‑7024. It increases number of events on the history buffer to 499.

Power supply, RNAC 8A 24V

CTN FPP-RNAC-8A-4C
Product No. F.01U.003.444

When connected to a panel’s option bus, the FPP-RNAC-8A-4C adds four additional NFPA 72, Class B or Class A NACs. When connected directly to the NAC output, it is also a NAC power supply for fire-protective signaling systems.

Relay module, form C, 10A 12/24V

CTN PAM-4
Product No. F.01U.135.043

One set of 10.0 A, Form C contacts that can be energized across a range from 9 VDC to 40 VDC

Title Type Language
Title
CSFM
Type
PDF
Language
Title
FCC
Type
PDF
Language
Title
FDNY-CoA
Type
PDF
Language
Title
FM
Type
PDF
Language
Title
UL
Type
PDF
Language
en-US 
Title
CAD Drawing DWG (FPD-7024)
Type
DWG
Language
en-US 
Title
Commercial Brochure
Type
PDF
Language
en-US 
Title
Datasheet (FPD-7024)
Type
PDF
Language
en-US 
Title
Installation manual
Type
PDF
Language
en-US  es-AR 
Title
Program Record Sheet
Type
PDF
Language
en-US  es-AR  pt-BR 
Title
Quick Selection Guide
Type
PDF
Language
en-US 
Title
Release notes
Type
PDF
Language
en-US 
Title
Special (- Smoke Detector Compatibility List)
Type
PDF
Language
en-US 
Title
Special (FPD-7024_ElecDocDownloads)
Type
PDF
Language
en-US  es-AR  pt-BR 
Title
Special (NAC Compatibility List)
Type
PDF
Language
en-US 
Title
Special (Operating instruction sheet)
Type
PDF
Language
en-US  pt-BR  es-ES 
Title
Special (Technical Bulletin - Product Issues During Installation)
Type
PDF
Language
en-US 
Title
Special (Technical Bulletin - Upgrading to FPD-7024)
Type
PDF
Language
en-US 
Title
Technical bulletin (F01U343343-01_FPD-7024_Translation_Error_TSN)
Type
PDF
Language
en-US  es-AR 
Title
Software (FPD-7024_Battery_Calculator_v1.10.03)
Type
ZIP
Language
en-US 
Title
Software (RPS v6.11.001)
Type
EXE
Language
en-US 
Title
Software (RPS-FPD7024-SP1)
Type
ZIP
Language
en-US  es-ES  fr-FR 
forward-right_adjusted