An error occurred
Welcome back Anonymous. Some items from your previous shopping cart have been restored to your current shopping cart.
Intrusion Alarm Systems
Accessories for Control Panels and Keypads
Our range of accessories complements the control panel offer for giving you all products for a comprehensive security solution
2-Wire Powered Loop
Commercial Type No.: B201 | Product No.: F.01U.323.798
- Suitable for use with 2-wire smoke detectors and burglary devices
- Supports up to 20 compatible smoke detectors
- Resets latching devices from the control panel
- Connects to the control panel terminal block with easy-to-install integrated pins
250 in stock
Auxiliary relay module, 12/24VDC
Commercial Type No.: D130 | Product No.: 4.998.125.828
- 12Â VDC or 24Â VDC relay
- Allows switching of current or voltage
- Two non-latching Form C dry contact outputs
- Red LED shows coil is energized
- Mounts in control panel enclosure
250 in stock
PRODUCT FAMILY
D9127 Series POPIT Modules
- Provides point identification of initiating devices
- Supervises wiring to devices for circuit integrity
- Expands the number of points in the system
- Compact size
- Terminal connections for reliability
- Multiplex technology
- Low installation costs
250 in stock
Door release module
Commercial Type No.: D8130 | Product No.: 4.998.125.927
- Two Form C (5Â A rated) contacts
- Remotely controls fire system devices
- Instant or delayed relay activation and restoral
- Relay closure follows indicating circuit duration
- Disable switch supervised for system testing
250 in stock
Dual relay module for 2A at 30VDC
Commercial Type No.: D134 | Product No.: 4.998.800.177
- Provides two Form C dry contacts, each rated for 2 A at 30 VDC
250 in stock
Ethernet Communication Module
Commercial Type No.: B426 | Product No.: F.01U.414.222
- Full two-way IP event reporting with remote control panel programming support
- 10/100 Base-T Ethernet communication for IPv6 and IPv4 networks
- NIST-FIPS197 Certified for 128-bit to 256-bit AES Encrypted Line Security
- Plug and Play installation, including UPnP service to enable remote programming behind firewalls
- Advanced configuration by browser, RPS, or A-Link
250 in stock
POPEX
Expansion module, SDI2
Commercial Type No.: B299 | Product No.: F.01U.385.673
- Provides point identification for up to 100 connected addressable initiating devices using POPITs
- Supervises wiring to devices for circuit integrity
- Expands the number of points in the system
- Compact size
- Interconnect wiring connectors for easy installation
250 in stock
Initiating circuit module, dual class A
Commercial Type No.: D129 | Product No.: 4.998.125.827
- Adjustable alarm and reset delays
- Provides two supervised Class A (Style D) loops
- Reliable terminal connections
- Suitable for waterflow switches
- Compensates for sprinkler alarm valve fanning
- Suitable for mechanical initiating devices
250 in stock
Inovonics SDI2 bus interface
Commercial Type No.: B820 | Product No.: F.01U.383.287
- Provides connectivity to Inovonics EchoStream EN4200 Serial Receiver
- May be installed up to 1000 ft from the control panel, allowing for optimal wireless reception
- Capacity to store any combination of point and keyfob ID’s for a total of 350 wireless devices (combined types) and up to 8 repeater ID’s
- Mounts directly inside the EN4200 Receiver housing, no separate enclosure required
- UL and CSFM Listed
250 in stock
Low battery disconnect module
Commercial Type No.: D135A | Product No.: 4.998.125.829
- Disconnects a B6512/B5512/B4512/B3512 from the battery when the battery level drops to 9.5 VDC
- Required for use with compatible control panels for CAN/ULC S559
- Quick and easy installation
250 in stock
Notification appliance module
Commercial Type No.: D192G | Product No.: 4.998.133.000
- Supervises 12Â VDC or 24Â VDC notification appliance circuits (NACs)
- Supervised signal silencing switch
- Notification appliance circuit rated at 3.0Â A
- Multiple module configurations
- Mounts in panel enclosure
250 in stock
Plug-in Communicator, Telephone
Commercial Type No.: B430 | Product No.: F.01U.414.206
- Provides a single telephone line with RJ-45 connection for central station reporting and remote programming
- Easily configured for communications from Remote Programming Software (RPS) or a keypad, eliminating the need for separate configuration
- Easy two-step plug-in installation, troubleshooting, and maintenance
250 in stock
Polarity reversing module, 2-/4-wire 24V
Commercial Type No.: D132B | Product No.: 4.998.140.232
- Works with both 2‑wire and 4‑wire 24 V circuits
- Can be used with Class A or Class B initiating circuits
- Can be mounted in the control panel enclosure
250 in stock
Powered loop interface
Commercial Type No.: D125B | Product No.: 4.998.800.203
- Two separate powered detector loops
- Suitable for 12 VDC or 24 VDC, two‑wire or four‑wire detectors
- Up to 50 two‑wire 12 VDC glass break detectors
- Reports individual loop alarm, individual loop trouble, and ground fault
- Manually resets latching devices from control panel or remote central station
250 in stock
RPS
Programming modem, 2400 baud
Commercial Type No.: MODEM-KIT-2400B | Product No.: 4.998.800.210
- For programming communications
250 in stock
Reversing relay module, 12V
Commercial Type No.: D132A | Product No.: 4.998.800.175
- Allows compatible control panels to sound all smoke detectors within a loop during an alarm
- Mounts easily on any of the three-hole module mounting locations in a compatible control panel enclosure
250 in stock
Single relay module for 2A at 30VDC
Commercial Type No.: D133 | Product No.: 4.998.800.176
- Provides one Form C dry contact rated for 2 A at 30 VDC
250 in stock
Supervision module, battery lead
Commercial Type No.: D113 | Product No.: 4.998.125.818
- Works with 12Â V nominal systems
- Meets NFPA 72 requirements for battery lead supervision for fire alarm control panels (FACPs)
250 in stock
CONETTIX
USB/serial interface module
Commercial Type No.: DX4010V2 | Product No.: F.01U.080.969
- RS-232/USB connectivity
- Enhanced direct connection for Remote Programming Software (RPS)
- RJ-16 data bus
- Transparent enclosure
- Diagnostic light emitting diodes (LEDs)
- DIP switches for address and bus programming
250 in stock
RADION receiver SD
Wireless SDI2 bus interface
Commercial Type No.: B810 | Product No.: F.01U.383.394
- Dual internal antennas provide spatial and polar RF signal reception for high reliability
- Cover and wall tamper protection
- Multiple device enrollment options as well as RF diagnostics ensure efficient and effective installation
- Supports supervision of wireless points (504), keyfobs (1000), and repeaters (8)
- External status LED
- Detection and reporting of radio frequency interference
250 in stock
Added to Your Shopping Cart